Advertisement
CARE AND MAINTENANCE
Fig. 10
Fig. 11
CHANGING & CLEANING THE DUST CUP FILTER
NOTE: It is recommended that the dust cup filter
be replaced every three (3) months to ensure peak
performance of the vacuum. See PARTS section for
information on ordering replacement filters.
1 Press the dust cup release button and pull out the
dust cup.
2 Carefully remove the dust cup filter and empty the
dust from the dust cup. (fig. 10)
3 Rinse the dust cup filter in cold water and let it
dry completely before replacing back into the dust
cup. Do not wash it in a washing machine or use a
hair dryer to dry it. Air dry only! (fig. 11)
8
1-800-798-7398
REPLACEMENT PARTS
REPLACEMENT PARTS
XF769
Dust Cup Filter
XB769N
Battery Pack
To order additional parts for your Shark
CORDLESS HAND
®
VACUUM model SV769*****14
go to www.sharkninjamanuals.com
or call 1-800-798-7398.
TROUBLESHOOTING GUIDE & REPLACEMENT PARTS
PROBLEM
SUGGESTED SOLUTION
The hand vacuum will not
• Batteries need to be recharged.
operate
• Batteries are dead and need to be replaced.
• There is no power in the electrical outlet being used while charging. Try
to charge using a different electrical outlet.
• The metal contact pins on the motorized brush are not in contact with
Motorized brush will not
work
the connector slots on the vacuum. Remove the motorized brush and
re-insert firmly into the air-intake nozzle.
• The motorized brush is blocked. Carefully remove all the lint, hair, etc.
from the motorized brush.
• Dust cup is full. Empty the dust cup.
Hand vacuum will not pick up
or suction is weak
• Dust cup filter needs cleaning or replacement. Clean or replace the dust
cup filter.
• Vacuum needs to be recharged.
Dust is escaping from the
• Empty the dust cup container.
hand vacuum
• The dust cup filter is not installed correctly. Remove it and re-insert it.
• The dust cup filter has a hole or a puncture in it. Replace it with a new
one.
www.sharkninjamanuals.com
9
Advertisement
