6. Troubleshooting
Problem
No picture or sound
Interference
Poor picture or audio
Remote control
doesn't work
7. Technical specification
Transmitter
Output level:
Operating freq. band:
Modulation:
Video input level:
Audio input level:
Video input impedance: 75 Ω
Audio input impedance: 600 Ω stereo
Power consumption:
Dimension:
Weight:
All specifications subject to change without notice. Errors excepted.
Possible solution
Check the power on/of switches on the transmitter and receiver
Check all cable connections
Make sure that transmitter and receiver have selected the same channel
The selected channel is disturbed; maybe a microwave oven, a DECT cordless
phone or similar are causing the disturbes.
The distance between transmitter and receiver is too much
Check the path between the transmitter and the audio/video source and clear
any obstructions.
Neon lights are in use in the room where the system is located
90 dBµV/m
at 3 meters
2,4 a 2,4835 GHz
4 channels
FM
(video and audio)
1V pp
1V pp
9 V DC, 300 mA
120 x 65 x 120 mm
140 g
Receiver
Video output level:
Audio input level:
Noise figure:
IR-remote Relay
Transmit frequency:
Power consumption:
Dimension:
Weight:
Operational range:
Remote control range:
1Vpp
1Vpp
3,5 dB
433,92 MHz
9 V DC, 200 mA
120 x 65 x 120 mm
160 g
100 mt.
(line of sight)
50 mt.
(line of sight)
31