MEDIA FUNK XT 700 Operating Instructions Manual page 26

®
3. Setting up mediaFunk system
3.1 Transmitter
Connect the audio/video (A/V) cable labeled "OUT" to the A/V RCA's of the transmitter and to a scart
connector (output) on the back of your satellite receiver, videorecorder, DVD, HiFi system etc. Plug the IR
extender (5) into the jack located on transmitter's upper side.
The IR extender gives you the ability to control the source using your existing remote control device.
Example: How to transmit audio/video from your satellite receiver
Transmitter
to power outlet
RCA to scart connector A/V cable "Sender"
OUT
SAT receiver
SAT IN cable 950-2150 MHz
SAT
Coaxial cable (optional)
RF
IN
OUT
TV
Scart to Scart connector A/V cable
26