MEDIA FUNK XT 700 Operating Instructions Manual page 30

Setting up the mediaFunk ® wireless A/V system
Room 1
SAT Receiver
VCR/DVD
(Camera)
Camcorder
Multi-Media PC
5. Using the mediaFunk
After having connected the mediaFunk ® system following the overmentioned instructions it is possible
to switch on the transmitter/receiver mediaFunk® through the on/off switch on the upper side.
The video and audio signals of the connected equipment are transmitted through the A/V transmitter to
the A/V receiver of the mediaFunk ® system. The video and audio signals of the mediaFunk® receiver
are transferred to the reproduction equipment (TV set) through a RCA - scart cable.
With the original remote control it is possible to control at distance the connected equipment within the
home location (see illustration above).
30 30
IR-
Transmission
Transmitter
®
Room 2
Receiver
Remote
Controller
TV Set
PC
Stereo