Instructions For Use - Hoover 2240 classic User Manual

Instructions for Use

It's better to put the
Virtual Wall Unit
behind the door.
a. Spot mode (S):
the cleaner can make repeated screw type cleaning within the scope of 3 feet of
diameter, focusing to clean a spot for 4 minutes. this mode is applicable for cleaning
a room that is dirty in some places.
b. Auto mode (M):
the cleaner will automatically clean the room for 30 minutes. this mode is applicable
for cleaning small rooms.
c. Turbo mode (L):
the cleaner won't stop running until complete consumption of its power. the
working time is excess 60 minutes. If the auto charging base plate is used, the
cleaner will automatically return to it for charging.
d. Timing mode:
the cleaning time can be set by the time setting key on the charging base
plate. the cleaner will leave the auto charging base plate to work as per
the pre-set time and the cleaning time is 60 minutes, and then it will
automatically return to the socket for charging.
1. Please ensure the battery is fully charged
2. Please ensure any unfixed articles are
3. turn on its main power start button,
Infrared ray
before starting the cleaner.
removed from the floor space before using
the cleaner, and ensure that there are no
spikes on the edges of the carpet or power
cables lying on the floor.
there are three start buttons: Spot, Auto
and turbo, representing three different
cleaning modes. In addition, there is a
timing work mode: