Sangean BluTab BTS-101 Operating Instruction page 8

3. Touch the NFC area of your playing device directly against the NFC
tag marked on the rear panel of your BluTab. The unit then automatically
connected with your NFC-enabled device. (If you pair with BluTab for
the first time, some NFC-enabled device will be asked the permission
to link with the speaker). Once paired with a device, 'Connecting BluTab...'
is shown on your NFC-enabled device. The speaker beeps and the
Bluetooth icon will illuminate in solid blue.
(Important: Please make sure the screen of your playing device is on
and unlocked to allow NFC to work.)
4. Use the controls on your device to play/pause and navigate tracks. In
addition, you can press and release the Bluetooth/Call answer-hangup
button to play/pause the tracks.
Note:
1. If you would like to link another Bluetooth device for the first time via
NFC, disconnect the existing linked Bluetooth device first.
2. The location of the NFC detection area is not the same on all devices.
When connecting with other Bluetooth device via NFC, refer to the
User guide of the other device for more information.
3. Some of metallic case or cover for mobile phones may reduce the
sensitivity of NFC. Make sure you remove it, before activating the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch directly against the speaker's
tag again on the back panel. The speaker will beep and the Bluetooth
status indicator (
the speaker is discoverable.
7
) on the speaker flashes fast flashing blue to show