Control Panel - Chauvet SlimPar HEX 6 IRC Quick Reference Manual

SlimPAR™ HEX 6 IRC QRG
Fuse
Replacement
Infrared Remote
Control 6 (IRC-6)
Mounting
Product
Mounting
Diagram

Control Panel

Description
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The SlimPAR™ HEX 6 IRC is fully compatible with the Infrared Remote
Control 6 (IRC-6) from CHAUVET®. For more information on the IRC-6
or to download instructions, go to www.chauvetlighting.com.
Before mounting this product, read the Safety Notes.
Mounting Clamp
Double-Bracketed Yoke
Button Function
<MENU>
Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
4
EN
Safety Cable
Bracket
Adjustment Knobs
(2x)