Manual Installation Using Arp And Ping In Windows - Axis 231D Installation Manual

Installing the AXIS 231D/232D
10

Manual Installation using ARP and Ping in Windows

Assign your product with a unique IP address from a computer on your network, as
follows:
1. Acquire an unused IP address for the AXIS 231D/232D from your network
administrator.
2. Connect a standard network cable to your AXIS 231D/232D and connect it to the
network.
3. Locate the serial number/MAC Address (S/N) found on the label on the AXIS
231D/232D.
4. From a computer on your network, open a Command Prompt, i.e. from the Windows
Start menu, select Run... and type cmd in the field. Click OK.
5. Enter the commands:
Syntax:
arp -s <IP address> <MAC address>
ping -l 408 -t <IP address>
Example
6. Connect the power to the AXIS 231D/232D.
7. When 'Reply from 192.168.0.125: ...' is displayed (approximately 10-15 seconds),
type Ctrl+C to close the ARP Ping session.
8. Start a Web browser and enter the IP address in the Address/Location field.
9. Press Enter.
10.Enter a new password for the root user (administrator).
11. If required, accept the installation of AMC onto your workstation. See AXIS Media
Control (AMC), on page 8 for more information.
12.The installation is now complete.
If you need additional information, refer to the AXIS 231D/232D User's Manual which is
available from the Axis web site at http://www.axis.com
Note: The ping command is
followed by -l (lower case L)