Table of Contents
Advertisement
.
DC power supply fundamentals
This section provides the basic information about the Ethernet Routing
Switch 8300 DC power supplies.
Navigation
•
•
•
•
•
Power supply LED
The following table describes the power supply Light Emitting Diode (LED)
on the DC power supply.
Table 2
Power supply LED
State
Off
On (green)
DC power supply accessories
The Ethernet Routing Switch 8300 chassis ships with no installed power
supplies. Install the first power supply in the left-most bay. Power supply
bays are numbered 1, 2, and 3 from left to right as viewed from the front
of the chassis for the 8306 and 8310. For instructions to install the power
supply, see
Copyright © 2008 Nortel Networks
.
"Power supply LED" (page 23)
"Ethernet Routing Switch 8300 series chassis" (page 24)
"8005DI DC power supply" (page 24)
"8005DC power supply" (page 25)
"Redundant power configuration" (page 26)
Description
No output is present
Power supply output is normal
"Installing the DC power supply" (page
Nortel Ethernet Routing Switch 8300
Installation — DC Power Supply
NN46200-310 01.01 Standard
9 June 2008
31).
23
Advertisement
Table of Contents
