Section 10 Extension Cords; Section 11 Maintenance And Care - AND 0503N1E-MDL04-320 Original Instructions Manual

Electric lawn mower premium
Table of Contents

Advertisement

Available languages

Available languages

The blade is made of pressed steel. It will be necessary to reshape it frequently(with a grind wheel).
Ensure that it is always balanced (an unbalanced blade will cause dangerous vibrations). To check for
balance, insert a round rod through the central hole and support the blade horizontally. A balance blade will
remain horizontal. If the blade is not balanced the heavy end will rotate downwards. Reshape the heavy end
until the blade is currently balanced. To remove the blade (1), unscrew the blade screw (2).and replace any
parts, which are damaged. When reassembling, make sure that the cutting edges face in the direction of the
motor rotation. The blade screw (2) must be tightened to torque 20 N.m.
WARNING: For service, replace the blade with:
Fig.7
WARNING: Disconnect the electric cord from the power supply.
WARNING: Protect hands by using heavy gloves or a rag to grasp the cutting blades when replace the
blade.
10. EXTENSION CORDS
You should only use extension cords for outdoor use, PVC ordinary duty with a cross sectional area not less
than 1.0mm²(not lighter than H05VV-F 2x1.0mm
signs of damaged during use, disconnect the cord for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY. Do not use the appliance if the cord is damaged or worn. Keep
extension cord away from cutting elements.
Warning: Always ensure that the ventilation openings are kept clear of debris.
11. MAINTENANCE AND CARE
Warning:
Before performing any maintenance or cleaning work, Always pull out the mains
plug!
Do not spray the unit with water. Ingress of water may destroy the switch-plug combination unit and the
electric motor. Clean the unit with a cloth, hand brush, etc.
Expert inspection is required, do not make any adjustment by yourself, must contact
authorized service centre:
-
Professional maintenance
2
).Before using, check the supply and extension cords for
- 12
ONLY
Проверил: Р.Ч./24.03.2015г

Advertisement

Table of Contents
loading

Table of Contents