Setting A Password - Acer 310 User Manual

310-e.book Page 89 Tuesday, October 27, 1998 5:17 PM

Setting a Password

Follow these steps:
1. Use the
Chapter 5 Software
Parameter Description
User When set, this password protects the computer
Password is and this Setup Utility from unauthorized entry.
When Password on boot and/or Password check
during Resume is enabled, you need to enter this
password to continue operation.
Before setting the user password, you need to set
the Supervisor Password.
Options: Disabled or Enabled
Set Press Enter to set the supervisor password. See
Supervisor "Setting a Password" on page 89 for how to set a
Password password.
Set User Press Enter to set the user password. See "Setting
Password a Password" on page 89 for how to set a
password.
Password When enabled, the computer prompts you for a
on boot password when the computer boots up.
Options: Enabled or Disabled
Password When enabled, the computer prompts you for a
check password when the computer resumes from
during standby or hibernation mode.
Resume
Options: Disabled or Enabled
Note: To set the User Password or the Password on boot
and Password check during Resume parameters, you
need to set the Supervisor Password first.
and keys to highlight a Set Password
parameter (Supervisor or User) and press the Enter key.
Setup Utility
89