Troubleshooting; Technical Data; Disposal - AEG KRC 4350 BT Instruction Manual

English
40

Troubleshooting

Fault Cause
Unit cannot Unit crashes and
be operated. "hangs".
No audio The device is not
signal via the registered with the
Bluetooth audio source.
connection
Volume too low
Device cannot Pairing does not
be connected. work
Audio source is
switched off
Bluetooth is switched
off at the audio
source.
Bluetooth version is
not supported.

Technical Data

Model: ..........................................................................KRC 4350 BT
Power supply: .....................................................220-240 V~, 50 Hz
Power consumption:...................................................................4 W
Protection class: ................................................................................II
Battery Power reserve: ................................ 2x 1.5 V, Type AA, R6
Net weight: .............................................................................0.58 kg
Radio section
Frequency ranges: .................................. FM 87.5 ~ 108 MHz
Bluetooth
Bluetooth support: ........................................................V2.0 + EDR
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................2.402-2.480 GHz
Protocols: ....................................................................A2DP/AVRCP
We reserve the right to make technical and design changes
in the course of our ongoing product development.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Solution
Disconnect from the
mains for around

Disposal

5 seconds. Then
switch the unit on
Meaning of the "Dustbin" Symbol
again.
Protect our environment: do not dispose of electrical equip-
Check whether a
ment in the domestic waste.
connection exists.
Please return any electrical equipment that you will no longer
Reregister the device
use to the collection points provided for their disposal.
with the audio source,
if necessary.
This helps avoid the potential effects of incorrect disposal on
Increase the volume
the environment and human health.
on the device.
This will contribute to the recycling and other forms of reutili-
Increase the volume
sation of electrical and electronic equipment.
on the audio source.
Information concerning where the equipment can be dis-
Check whether the
posed of can be obtained from your local authority.
audio source supports
the A2DP protocol.
Switch on the audio
source
Switch on the Blue-
tooth function in the
audio source.
Use a different play-
back unit.