Table of Contents
Advertisement
34
Log rotators
The log rotators sometimes can stop archiving log files after changes are made to
the rotation schedule. If this occurs, uncheck and recheck the "Rotate Log Files by
Date" checkbox under Server Setup > Log Setup > <log_file>. This resets the
log rotator.
Operation progress bar
During several operations, such as Import from Network and Send to Network,
the progress bar remains at a percentage for a long time. This is normal, and can
last for several minutes.
Import data
Telephony changes to lines and sets are not reflected in import data until the next
day. Changes made to the Business Communications Manager are not reflected in
the import data immediately. You must schedule an import to take place after
3:00 a.m. (the time that the line and set inventory takes place) in order to update
NCM.
Viewing syslog messages
When you change the IP address for remote logging or change from remote to
local logging, you cannot view syslog messages. You must disable, and then
reenable, the syslog server to view syslog messages properly.
TFTP server on Solaris platforms
The NCM server does not recognize alternate IP addresses assigned to interfaces
on machines running Solaris 8. As a result, NCM does not populate the list for the
internal TFTP server.
N0033985 1.0
Advertisement
Table of Contents
