Dbs1 Inputs/ Outputs; Analog Inputs; Analog Outputs; Ethernet Connector - Four Audio DBS1 User Manual

5. DBS1 Inputs/ Outputs

The DBS1 provides 2 balanced analog inputs and 2 balanced analog outputs for audio.

5.1. Analog Inputs

The analog inputs provide a dynamic range of 115 dB(A) with a maximum input voltage of 30 dBu.
Following functions are available:
Sensitivity
48 V Phantom Power
st
70 Hz / 1 order low cut filter
(Bold values are factory default)
The two input channels will appear as Channel 1 and 2 of the DBS1 device in the Dante® Controller Software.

5.2. Analog Outputs

The analog outputs provide a dynamic range of 114dB(A) with a maximum output voltage of 15 dBu.
Following functions are available:
Sensitiviy
Phase Invert 0° / 180°
Mute On / Off
Both output channels will appear as Channel 1 and 2 of the DBS1 device in the Dante® Controller software.

5.3. Ethernet connector

The DBS1 has one RJ-45 Ethernet connector to connect the unit to a Dante® Primary network. For information
about how to set-up a Dante® network please check Audinate's help site and the famous Dante FAQ
https://www.audinate.com/resources/faqs

5.4. Power Supply jack

Use the supplied 5 V desktop power supply or Power over Ethernet (PoE).
The external power supply and PoE can be used simultaneously to achieve redundancy.
The metal bracket on the rear provides a pull relief.
+30 / +21 / .. / +3 / 0 / -3 /.. -42 / -45 dBu
On / Off
On / Off
-48 dBu .. 15 dBu in 3 dB steps
Date: 2016-02-18
DBS1 user manual
3 dB steps
7