Vibration Reduction - Nikon COOLPIX S560 User Manual

g Vibration reduction
Specify the vibration reduction setting for shooting pictures. Vibration reduction
effectively corrects blur that commonly occurs when shooting with zooming or at
slow shutter speeds.
Turn vibration reduction off when using a tripod to stabilize the camera during
shooting.
On (default setting)
Specify the vibration reduction setting for shooting pictures. The camera detects
and factors out panning movements automatically when reducing camera shaking.
When the camera is panned horizontally, for example, vibration reduction affects
only vertical shaking. If the camera is panned vertically, vibration reduction affects
only horizontal shaking.
Off
Electronic vibration reduction is not enabled.
When vibration reduction is enabled, the current setting is displayed on the
monitor during shooting (When off is selected, an icon for the current setting is
not displayed on the monitor.) (A 6).
B
Notes on Vibration reduction
• Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed on the camera's
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shaking in some
situations.
• "VR" stands for vibration reduction.
D
Compensating Movies with Electronic VR
To reduce the effects of camera shake when recording movies other than time-lapse movies, enable
Electronic VR (A 71) from the movie menu (A 70).
Basic Camera Setup: The Setup Menu
123