Sanyo VHR-510 Instruction Manual page 15

TIMER RECORDING PROGRAMMING
You can set up to 6 programmed to be recorded
upon a period of up to 1 year.
Before starting
Turn on the TV then set it to the preset video
channel or
AV mode.
Be
sure
that the set date and time are correct.
E Insert a video cassette with erasure-prevention
tab,
D
Ol%dl
PROQ
4
Oma&l
&n+&l
li&!50
INPUT
Exam~le:
To reco'rd a programme from the TV station on
programme position "02" from 21:30 to 23:15 on
December 25.
~ Press the PROG button.
@ Using the numeric buttons, set the programme
position number (e.g. "02")
Enter 02,
To record from an external source
Press the INPUT button. The setting under "PR"
(programme position) will change to "L1".
El If a programme position number is already
displayed, first press the
CLEAR
button.
Additional settings
•l EverydayAfteekly recording
Press the (+) button repeatedly to select:
"Ed": for everyday recording
"WK": for weekly recording (the same
programme everyweek)
No display: for one time recording
Set the date (e.g. December 25)
Enter 2512.
Illl!mm
Set the recording on time (e.g. 21 :30)
Set the recording off time (e.g. 23:15)
Enter 2315.
Iilmm!l
When all the settings are as desired, press the
OK button.
CI You can programme another recording by
repeating steps 0 to @.
@ Press the POWER button.
The timer indicator (B) will light on the VCR
display and the VCR goes into timer recording
stand-by mode.
Notes:
If there is a power failure during a timer recording,
the recording will stop. If the power is returned to
the VCR within 60 minutes, the recording will
resume if the end time has not yet been reached
The (D) indicator will flash if no video cassette is
loaded when going into timer stand-by mode.
The (~) indicator will flash and the video cassette
is ejected if a video cassette with no
erasure-prevention tab is loaded.
—
—
4'
\DVANCED
)PERATION
13
-1—
—