Sanyo VHR-510 Instruction Manual page 18

5
OTHER
TROUBLESHOOTING
The remote control unit
The batteries are low.
doesn't operate
RECEIVER TROUBLE
No TV programmed Are the connections between your VCR and TV correct?
received
Was tunina correctly ~reset?
Off the air reception on the
The video channel setting of the TV receiver does not correspond to
VCR is Door the video channel presetting of the VCR.
PLAYBACK TROUBLE
Playback picture does not
The video channel setting of the TV receiver does not correspond to
appear
the video channel presetting of the VCR.
Interference in playback I Adjust the tracking control
picture
Dust or dirt on video heads. Take the VCR to an Authorized Service
Station or dealer.
RECORDING TROUBLE
No recording The erasure-prevention tab on the cassette has been removed.
Timer recording is not The starting day and time have not been set correctly.
possible
The clock time is not set correctly.
There has been a power interruption of more than 60 minutes.