Filling The Boiler With Water; Starting The Appliance - Monster EZ1 Instruction Manual

FILLING THE BOILER WITH WATER

WARNING: carefully read all instructions before unscrewing the safety cap.
WARNING: always unplug the appliance before filling the boiler.
IMPORTANT: DO NOT add detergents, perfumes, oils or other chemical substances. Use tap water
or dilute it with distilled water if tap water is too hard.
Follow the instructions to avoid water from overflowing.
Step 1: before filling the appliance make sure it is unplugged.
Step 2: Make sure that the handle of the appliance is in the
upright off-position. Unscrew the safety cap by turning
it counterclockwise until it is removed.
Step 3:
Pour max. 0.6 l / 20 oz water using the provided
measuring cup making sure that the water does not
overflow. Screw the safety cap back on turning
it clockwise. If you use cold water, heating time is
abou3-5 minutes. Using warm water, the heating time
is reduced.

STARTING THE APPLIANCE

Step 1:
Insert the plug into a 3 prong grounded wall socket.
The ORANGE power light will glow.
Step 2: Keeping the handle in the upright off-position.
Wait until the GREEN ready steam indicator
light glows.
22
green
orange