Monster EZ1 Instruction Manual page 20

Remove the self tapping screw
from the bottom of handle tube.
Insert the handle assembly into the
floor steamer with SPECIAL ATTENTION
to ALIGNING the lock/unlock
position shown in figure (C).
ASSEMBLING INSTRUCTION
C
Twist the handle assembly as shown in figure (D).
I
E
Twist the handle assembly as shown in figure (E).
You will align the handle assembly screw hole
with the opening in the steamer housing.
Secure the handle assembly with self tapping
screw you remove from the bottom of handle
tube. (See figure E)
20
90°
D
H