Monster EZ1 Instruction Manual page 15

TABLE OF CONTENTS PAGE
Important safety instruction ................................................................. 16
Description of the appliance............................................................... 18
Assembling instruction .......................................................................... 19
Using your floor steamer ....................................................................... 21
Microfibre pad care ............................................................................. 21
Filling the boiler with water................................................................... 22
Starting the appliance ......................................................................... 22
Refilling the boiler with water ............................................................... 25
Trouble shooting .................................................................................... 26
ELECTRICAL CONNECTION (UK ONLY)
For your safety please read the following information.
Warning: This appliance must be earthed.
The appliance must be connected to a 220-240 volts 50 cycle AC supply by means of a three
pin socket, suitably earthed and should be protected by a 13 amp fuse in the plug.
The appliance is supplied with a rewireable 13 amp 3 pin plug fitted with a 13 amp fuse. Should
the fuse require replacement, it must be replaced with a fuse rated at 13 amp and approved
to BS1362.
If the mains plug is unsuitable for the socket outlet in your home or is removed for any other reason,
then the cut off plug should be disposed of safely to prevent the hazard of electric shock.
There is a danger of electric shock if the cut off plug is inserted into any 13 amp socket outlet.
How to wire a 13 amp plug.
Important
The wires in the mains lead on this appliance are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
The green and yellow wire must be connected to
the terminal in the plug which is marked with the
letter E or with the earth symbol .
The blue wire must be connected to the terminal marked N.
The brown wire must be connected to the terminal marked L.
15