Table of Contents
Advertisement
Dynamic bass boost system (DBBS)
Set the DBBS switch to ON to enhance
the bass sound.
Auto power on function
The power turns on automatically when
button is pressed.
i/
Auto power off function
The power turns off automatically after
about 60 seconds when all tracks on a
disc have been played or when the n/
button is pressed once to stop play.
Hold function
The HOLD switch disables the buttons
from operating to prevent play from start-
ing or stopping due to accidental
operation. For normal use, leave the
switch in the off position.
To prevent battery drain:
Set the HOLD switch to the on position
when carrying the unit in a bag. The i/
button will not function even if the button is
pressed accidentally. "HOLD" appears
briefly on the display.
ON
To prevent play from being interrupted:
Set the HOLD switch to the on position
after starting play. "HOLD" appears.
7
OFF
If the operating buttons do not func-
tion when pressed ...
1. Check whether the HOLD switch is
on or not.
2. Remove the batteries and/or dis-
connect the AC adaptor from the
unit. Wait a few seconds, then re-
install the batteries or reconnect the
AC adaptor.
3. If the buttons still do not function,
insert new batteries .
Advertisement
Table of Contents
