Chauvet CORE 3x1 Quick Reference Manual page 3

EN
What Is
Included
To Begin
Description
Overview
AC Power
Power Linking
Fuse
Replacement
•
CORE™ 3x1
•
Hanging Bracket with Mounting
Hardware
Unpack your CORE™ 3x1 and make sure you have received all parts in
good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The CORE™ 3x1 is a compact strip light. It is designed for use as a blinder
or wash light with pixel mapping capability. Control options include
Sound-Active mode, auto programs, Master/Slave mode and DMX. Five
personality choices are available through 3-, 5-, 9-, 10-, and 13-channel
DMX modes. You can achieve flicker-free video operation with
high-frequency LED dimming.
Power In
Fuse Holder
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 10 CORE™ 3x1 products at 120 VAC and 21 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
•
•
•
Microphone
Power
DMX Out
Out
DMX In
3
CORE™ 3x1 QRG
Power Cord
Warranty Card
Quick Reference Guide
Control Buttons
Display
Back Panel View