Bosch GBH Professional 36 V-LI Original Instructions Manual page 16

OBJ_BUCH-283-007.book Page 16 Monday, October 21, 2013 11:35 AM
16 | English
Technical Data
Rotary Hammer
Article number 3 611 J00 R.. 3 611 J01 R..
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated voltage V=
Rated power input W
Output power W
-1
Impact rate min
Impact energy per
stroke according to
EPTA-Procedure
05/2009 J
Rated speed
-1
– Right rotation min
-1
– Left rotation min
Tool holder
Spindle collar diame-
ter mm
Drilling diameter,
max.:
– Concrete mm
– Brickwork (with
core bit) mm
– Steel mm
– Wood mm
Weight according to
EPTA-Procedure
01/2003 kg
* dependent of the battery pack being used
Battery
Permitted ambient temperature
– when charging
– during operation*
– during storage
Recommended batteries
* Limited performance at temperatures <0
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); sound power level
102 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
GBH 36 V-LI
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
Hammer drilling into concrete: a
h
2
Chiselling: a =11.5 m/s , K=1.5 m/s
h
2
Drilling in metal: a <2.5 m/s , K=1.5 m/s
h
Screwdriving without impact: a
h
1 619 92A 065 | (21.10.13)
GBH 36 VF-LI
Vibration total values a
GBH 36 V-LI GBH 36 VF-LI
determined according to EN 60745:
Hammer drilling into concrete: a
 
Chiselling: a
Drilling in metal: a
 
Screwdriving without impact: a
 
The vibration level given in this information sheet has been

–
measured in accordance with a standardised test given in
36 36
EN 60745 and may be used to compare one tool with another.
600 600 It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
430 430
plications of the tool. However if the tool is used for different
0 –4260 0 –4260
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
2.8 2.8
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
0 –960 0 –960 when it is running but not actually doing the job. This may signif-
0 –930 0 –930
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
SDS-plus SDS-plus
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
50 50
terns.
Declaration of Conformity
26 26
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
68 68
lowing standards or standardization documents: EN 60745
13 13
according to the provisions of the directives 2011/65/EU,
30 30
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
3.9/4.4* 4.0/4.5*
D-70745 Leinfelden-Echterdingen
Henk Becker
Executive Vice President
Engineering
°C 0...+45
°C –20...+50
°C –20...+60
GBA 36V XXAh H-.
Robert Bosch GmbH, Power Tools Division
°C
D-70745 Leinfelden-Echterdingen
Leinfelden, 21.10.2013
Assembly
Battery Charging
 Use only the battery chargers listed on the accessories
Note: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
2 2
=19 m/s , K=1.5 m/s ,
battery charger before using your power tool for the first time.
2
,
The lithium ion battery can be charged at any time without re-
2
,
ducing its service life. Interrupting the charging procedure
2 2
<2.5 m/s , K=1.5 m/s
does not damage the battery.
(triax vector sum) and uncertainty K
h
=19 m/s
h
2 2
=11 m/s , K=1.5 m/s
h
2
<2.5 m/s , K=1.5 m/s
h
<2.5 m/s
h
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
page. Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
2 2
, K=1.5 m/s ,
,
2
,
2 2
, K=1.5 m/s
Bosch Power Tools