Sony DAV-DZ670M Operating Instructions Manual page 85

The system turns on.
2
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display.
3
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
4
Press X/x to select
then press .
The options for [SETUP] appear.
5
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
6
Press X/x to select [AUDIO SETUP],
then press .
The options for [AUDIO SETUP] appear.
7
Press X/x to select [S-AIR SETUP t],
then press .
Note
• When the wireless transmitter is not inserted in
the unit, [S-AIR SETUP] cannot be selected.
8
Press X/x to select [ID], then press
9
Press X/x to select the desired ID, then
press .
You can select any ID (A, B, or C).
The confirmation display appears.
10
Press .
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
This unit
ID A
ID A
ID A
S-AIR sub unit
S-AIR sub unit
[SETUP],
.
Other S-AIR main
unit
ID B
ID B
S-AIR sub unit
Tip
• To confirm the current ID, perform Steps 1 to 7
above. When you pair the unit with the S-AIR sub
unit (page 86), [(PAIRING)] appears beside ID on
the display for selecting ID.
To set the ID of the surround
amplifier
Refer to the operating instructions of the
surround amplifier.
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
Note
• It is easy to set the same ID for the unit and S-AIR sub
unit to establish sound transmission. However,
neighbors may also receive your system's sound if
IDs are the same, or you may receive the sound from
neighbors. To prevent this, you can identify the unit
with a specific S-AIR sub unit by performing the
pairing operation (page 86).
Enjoying the system's sound in
another room
For the S-AIR receiver
You can enjoy the system's sound by using the
S-AIR receiver. The S-AIR receiver can be
installed anywhere, regardless of the location of
the unit, for enjoying the system's sound in
another room.
For details of the S-AIR receiver, refer to the
operating instructions of the S-AIR receiver.
1
Set the ID of the S-AIR receiver to that
of the unit.
• To set the ID of the unit, see "To set the ID
of the unit" (page 84).
• To set the ID of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
Note
• When you are using another S-AIR sub unit,
such as a surround amplifier, do not change the
ID of the unit. Set the ID of the S-AIR receiver
to the same ID as the unit.
85
GB