Sony ILCE-6300 Instruction Manual page 17

x Supplying power
You can use the camera while power is supplied from a wall outlet (wall
socket) by using the AC Adaptor (supplied).
Notes
• The camera will not activate if there is no remaining battery. Insert a sufficiently
charged battery pack into the camera.
• If you use the camera while power is being supplied from a wall outlet (wall
socket), make sure that the icon (
• Do not remove the battery pack while power is being supplied from a wall outlet
(wall socket). If you remove the battery pack, the camera will turn off.
• Do not remove the battery pack while the access lamp (page 12) is lit. The data on
the memory card may be damaged.
• As long as the power is on, the battery pack will not be charged even if the camera
is connected to the AC Adaptor.
• Under certain usage conditions, the battery power may be consumed as a backup
even when the camera is connected to the AC Adaptor while being used.
• Do not remove the micro USB cable while power is being supplied via USB
connection. Before you remove the micro USB cable, turn off the camera.
• While power is being supplied via USB connection, the temperature inside the
camera will rise and the continuous recording time may be shortened.
• When using a mobile charger as a power source, confirm that the mobile charger is
fully charged before use. Also, be careful of the remaining power on the mobile
charger during use.
) displays on the monitor.
GB
GB
17