Video And Audio Settings; Television Standard - Topfield TF 4400 PVRt User Manual

18 Preference Settings

3.2 Video and audio settings

3.2.1 Television standard

The digital receiver supports two television standards. One
is PAL standard, and the other is NTSC standard. PAL was
adopted in European countries while NTSC is adopted in USA,
Canada, Mexico and so forth. Refer to Table
standard of your local area.
If you have a PAL television, you have to set the TV Type option
to PAL. In that case, if you switch to a service of the NTSC
standard, though it is unlikely to happen, the digital receiver
will present the pictures converting into the PAL standard.
However, it is inevitable to lose a little picture quality. Likewise,
the contrary case brings about the same result.
The best thing is to watch PAL services with a PAL television
and to watch NTSC services with a NTSC television. However,
a multi television set is able to process both of them. So if
you have a multi television set, you had better set the TV Type
option to Multi. Then the digital receiver will present pictures
without standard conversion.
You have to configure the video
and audio settings appropriately
to your television set and other
appliances.
Select the System Setting
A/V Output Setting menu. You
should see a screen like the left
figure.
3.1 for television