ZyXEL Communications ZyAIR B-220 Quick Installation Manual page 16

PROBLEM
Cannot start the
ZyAIR Wireless
LAN Utility.
The ZyAIR
Wireless LAN
Utility displays
only three tabs.
Use the Device Manager window to check for possible
hardware conflicts.
Click Start, Settings, Control Panel, System, Hardware and
then click Device Manager. Verify the status of the ZyAIR
under Network Adapter. (Steps may vary depending on the
version of Windows).
Install the ZyAIR in another computer.
If the error persists, you may have a hardware problem. In this
case, you should contact your local vendor.
Make sure the ZyAIR is properly inserted and the LINK LED
blinks.
Use Device Manager to check for possible hardware conflicts.
Click Start, Settings, Control Panel, System, Hardware and
then click Device Manager. Verify the status of the ZyAIR
under Network Adapter. (Steps may vary depending on the
version of Windows).
Install the ZyAIR in another computer.
If the error persists, you may have a hardware problem. In this
case, you should contact your local vendor.
When the ZyAIR Wireless LAN Utility displays only three tabs,
you are using the Windows XP wireless configuration tool at the
same time. Refer to the Disable Windows XP Wireless section
to disable the Windows XP wireless configuration tool.
CORRECTIVE ACTION
16