Using The Remote - Sony CMT-VP1 Operating Manual

Step 1: Hooking up the system
(continued)
Inserting two size-AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes on batteries
• Make sure the battery poles (plus/minus) are
properly oriented.
• Do not use a new battery with an old one.
• Do not use different types of batteries together.
• If you do not use the remote for a long period of
time, remove the batteries to prevent possible
damage from battery leakage and corrosion.
• Do not use a battery that is leaking.
• If a battery has leaked, clean the battery
compartment and replace all the batteries.
• Do not place the remote in an extremely hot or
humid place.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
6

Using the remote

You can use the shaded buttons shown below to
operate a Sony TV set.
TV ?/1
?/1
+ +
TV VOL + / –
– –
To
Turn the TV on or off
Switch the TV's video
input
Change the TV
channel
Adjust the volume of
the TV speaker(s)
TV/VIDEO
TV CH + / –
Press
TV ?/1.
TV/VIDEO.
TV CH +/–.
TV VOL +/–.