Advertisement
Quick Links
4-418-714-14 (1)
Micro HI-FI
Component System
Operating Instructions
GB
©2012 Sony Corporation
Printed in China
CMT-V75BTiP
shop where you purchased the product.
Applicable accessory: Remote commander
Europe Only
Europe Only
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
WARNING
symbols for mercury (Hg) or lead (Pb) are added if the
battery contains more than 0.0005% mercury or 0.004%
To reduce the risk of fire, do not cover the ventilation
lead.
opening of the apparatus with newspapers, tablecloths,
By ensuring these batteries are disposed of correctly,
curtains, etc. Do not place the naked flame sources such
you will help prevent potentially negative consequences
as lighted candles on the apparatus.
for the environment and human health which could
To reduce the risk of fire or electric shock, do not expose
otherwise be caused by inappropriate waste handling of
this apparatus to dripping or splashing, and do not
the battery. The recycling of the materials will help to
place objects filled with liquids, such as vases, on the
conserve natural resources.
apparatus.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with
Do not install the appliance in a confined space, such as
an incorporated battery, this battery should be replaced
a bookcase or built-in cabinet.
by qualified service staff only. To ensure that the battery
As the main plug is used to disconnect the unit from
will be treated properly, hand over the product at end-
the mains, connect the unit to an easily accessible
of-life to the applicable collection point for the recycling
AC outlet. Should you notice an abnormality in the
of electrical and electronic equipment.
unit, disconnect the main plug from the AC outlet
For all other batteries, please view the section on how
immediately.
to remove the battery from the product safely. Hand the
Do not expose batteries or apparatus with battery-
battery over to the applicable collection point for the
installed to excessive heat such as sunshine, fire or the
recycling of waste batteries.
like.
For more detailed information about recycling of this
product or battery, please contact your local Civic
The unit is not disconnected from the mains as long as
Office, your household waste disposal service or the
it is connected to the AC outlet, even if the unit itself has
shop where you purchased the product.
been turned off.
This equipment has been tested and found to comply
The nameplate is located on the bottom exterior of the
with the limits set out in the EMC Directive using a
unit.
connection cable shorter than 3 meters.
Excessive sound pressure from earphones and
Hereby, Sony Corp., declares that this equipment is in
headphones can cause hearing loss.
compliance with the essential requirements and other
CAUTION
relevant provisions of Directive 1999/5/EC. For details,
The use of optical instruments with this product will
please access the following URL:
increase eye hazard.
http://www.compliance.sony.de/
Norway:
This appliance is classified
Use of this radio equipment is not allowed in the
as a CLASS 1 LASER
geographical area within a radius of 20 km from the
product. This marking
centre of Ny-Alesund, Svalbard.
is located on the bottom
exterior of the unit.
Note on DualDiscs
A DualDisc is a two sided disc product which mates
Notice for customers: the following
DVD recorded material on one side with digital
information is only applicable to
audio material on the other side. However, since the
equipment sold in countries applying EU
audio material side does not conform to the Compact
directives.
Disc (CD) standard, playback on this product is not
This product has been manufactured by or on behalf
guaranteed.
of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. Inquiries related to product compliance
Music discs encoded with copyright
based on European Union legislation shall be addressed
protection technologies
to the authorized representative, Sony Deutschland
This product is designed to playback discs that conform
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
to the Compact Disc (CD) standard. Recently, various
Germany. For any service or guarantee matters, please
music discs encoded with copyright protection
refer to the addresses provided in the separate service or
technologies are marketed by some record companies.
guarantee documents.
Please be aware that among those discs, there are some
For customers in Europe and Australia
that do not conform to the CD standard and may not be
playable by this product.
Disposal of Old Electrical &
License and Trademark Notice
Electronic Equipment
(Applicable in the European
iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
Union and other European
other countries. iPad is a trademark of Apple Inc.
countries with separate
MPEG Layer-3 audio coding technology and patents
collection systems)
licensed from Fraunhofer IIS and Thomson.
This symbol on the product or on its packaging
Windows Media is either a registered trademark or
indicates that this product shall not be treated as
trademark of Microsoft Corporation in the United
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
States and/or other countries.
electrical and electronic equipment. By ensuring this
This product is protected by certain intellectual
product is disposed of correctly, you will help prevent
property rights of Microsoft Corporation. Use or
potential negative consequences for the environment
distribution of such technology outside of this product
and human health, which could otherwise be caused
is prohibited without a license from Microsoft or an
by inappropriate waste handling of this product. The
authorized Microsoft subsidiary.
recycling of materials will help to conserve natural
All other trademarks and registered trademarks are
resources. For more detailed information about
™
®
recycling of this product, please contact your local Civic
of their respective holders. In this manual,
and
Office, your household waste disposal service or the
marks are not specified.
Location of Controls
Unit (Top)
* The system is set at the factory for the key-
* The system is set at the factory for the key-
Touch Panel*
touch confirmation beep to sound when you
touch confirmation beep to sound when you
press a touch panel key on the unit. You can
press a touch panel key on the unit. You can
turn off the beep sound.
turn off the beep sound.
Display
Disc slot
Unit (Front)
Function indicator
Remote sensor
iPod/iPhone/iPad connector
Dock indicator
To use the remote
About the function indicator
Slide and remove the battery compartment lid, and
The function indicator lights in different colors
insert the two supplied R6 (size AA) batteries, side
according to the function. You can tell the current
function by the color of the indicator.
first, matching the polarities shown below.
The indicator color of each function is same color as that
of the corresponding FUNCTION button on the remote.
Function
Button on the
Indicator color
remote
DAB
DAB
Pink
FM
FM
Sky blue
AUDIO IN
AUDIO IN
Amber
Notes on using the remote
With normal use, the batteries should last for about 6 months.
CD
CD
Yellow
Do not mix an old battery with a new one or mix different types of
iPod
iPod
White
batteries.
If you do not use the remote for a long period of time, remove the
BT AUDIO
BLUETOOTH
Blue
batteries to avoid damage from battery leakage and corrosion.
(Bluetooth)
Remote
*1
(Illumination) button
Turn ON/OFF the dock indicator .
This manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or
similar names.
The function indicated by pink on the remote can be
activated using SHIFT . If you want to operate the
function indicated by pink, press and hold SHIFT
and press the button of the function indicated by pink.
If you press the button without holding the SHIFT
pressed the system activates the function indicated by
white.
Getting Started
DAB/FM lead antenna (Extend it horizontally.)
To AC Adapter
Attaching a protective cushion
(phones) jack
Attach the supplied protective cushion to avoid contact
Connect the headphones.
of an iPod/iPhone/iPad with the front panel of the
AUDIO IN jack
system.
You can protect against scratching the front panel
Connect an optional audio component.
and your iPod/iPhone/iPad by attaching the supplied
protective cushion.
Power (DC IN 19.5 V)
1
Connect the power cord to the AC adapter.
2
Connect the AC adapter to the unit, and then plug
the power cord in to a wall outlet.
DAB/FM antennas
Find a location and an orientation that provide good
reception, and then set up the antennas.
Keep the antennas away from the power cord to avoid
picking up noise.
To use the iPod/iPhone/iPad
Protective cushion
1
Open the dock by pushing the center of the dock.
Adjust the attaching position of the protective cushion
to suit to your iPod/iPhone/iPad.
Setting the clock
1
Press
to turn on the system.
2
Press and hold SHIFT
and TIMER MENU
to
select the clock set mode.
If "PLAY SET" flashes, press /
repeatedly to
select "CLOCK, " and then press
(enter)
.
3
Press /
repeatedly to set the hour, then press
(enter)
.
4
Use the same procedure to set the minutes.
Dock
Note
2
Place the iPod/iPhone/iPad.
The clock settings are reset when you disconnect the power cord or if
a power failure occurs.
To display the clock when the system is off
Press DISPLAY
. The clock is displayed for about
8 seconds.
Reception of DAB/DAB+ radio station
When you turn on the system for the first time after
you purchase the system, DAB Automatic Scan starts
automatically and creates a list of available services.
During the DAB Automatic Scan, ""
appears. Do not press any button on the unit or the
remote during DAB Automatic Scan. Scanning is
interrupted and service list may not be created properly.
To run the DAB Automatic Scan manually, perform
the procedure of "Running the DAB Automatic Scan
manually" in "Listening to the radio. " If you have moved
to another area, perform the DAB Automatic Scan
manually and re-register the contents of broadcasts.
Note
Be careful not to drop the unit when disconnecting an iPod/iPhone/
iPad from the iPod/iPhone/iPad connector.
Operations
Creating your own program
(Program Play)
Playing a CD/MP3 disc
1
Select the CD function.
Press CD FUNCTION
on the remote or press
1
Select the CD function.
FUNCTION
on the unit repeatedly.
Press CD FUNCTION
on the remote or press
The function indicator lights in yellow.
FUNCTION
on the unit repeatedly.
2
Select the play mode.
The function indicator lights in yellow.
Press PLAY MODE
repeatedly until "PGM"
2
Insert a disc.
appears while the player is stopped.
Insert a disc in the disc slot with the label side facing
3
Select a folder (MP3 disc only).
forward.
Press
+/
repeatedly to select the desired
folder. If you want to program all files in the folder,
press
.
Insert a disc with
the label side facing
4
Select the desired track or file number.
forward.
Press /
repeatedly until the desired track
or file number appears.
Eject a disc
Selected track or file
Total playing time of the
number
selected track or file
Playback starts automatically after "READING"
5
Program the selected track or file.
disappear.
Press
to enter the selected track or file.
When you changing from another function to the CD
"--.--" appears when the total playing time exceeds
function while a disc is already inserted in the disc
100 minutes for an CD or when you program an MP3
slot, press
on the remote or press
on
files.
the unit to start playback.
6
Repeat steps 3 through 5 to program additional
tracks or files, up to a total of 25 tracks or files.
Notes
When you turn on the system, the disc will not be pulled into the
7
To play your program of tracks or files, press
disc slot until "NO DISC" appears in the display. Do not attempt to
(or
on the unit).
push in the disc until "NO DISC" appears.
If you cannot insert the disc into the disc slot even when "NO
The program remains available until you remove the
DISC" appears in the display, there may already be a disc in the
disc from the disc slot or unplug the power cord.
slot. Press and hold down to eject such a disc forcibly. If even
To play the same program again, press
(or
the system does not then eject the disc, contact your nearest Sony
dealer.
on the unit).
If you cannot eject the disc and "LOCKED" appears in the display,
To cancel Program Play
contact your nearest Sony dealer.
Do not insert a disc with non-standard shapes (e.g., heart, square,
Press PLAY MODE
repeatedly until "PGM"
star). The disc may fall into the system and cause irreparable
disappears while the player is stopped.
damage.
When pressing on the unit and then reinserting the disc that
To delete the last track or file of the program
appears in the disc slot, do not simply push in the disc. Remove the
Press and hold SHIFT
and CLEAR
while the
disc from the disc slot and then reinsert it.
Do not turn off the system with a disc halfway inserted in the disc
player is stopped.
slot. Doing so may cause the disc to fall.
Do not use a disc with tape, seals or paste on it as this may cause
malfunction.
When you eject a disc, handle the disc by its edge. Do not touch
Listening to the radio
the surface.
Do not insert an 8 cm disc with an adapter. Doing so may cause the
system to malfunction.
Tuning in a FM station
Other operations
1
Select the FM function.
To
Press
Press FM FUNCTION
on the remote or press
(or
Pause playback
on the unit). To
FUNCTION
on the unit repeatedly.
resume play, press the button again.
The function indicator lights in sky blue.
Stop playback
.
2
Perform tuning.
Select a folder on
+/
.
an MP3 disc
For automatic scanning
Select a track or
/
.
Press TUNING MODE
repeatedly until "AUTO"
file
appears, and then press +/
. Scanning stops
Find a point in a
Hold down /
(or
automatically when a station is tuned in, and
/
track or file
on the unit) during
"STEREO" (for stereo programs only) light up in the
playback, and release the button at
display.
the desired point.
Select Repeat Play REPEAT
repeatedly until "
"
or "
1" appears.
Eject a disc
on the unit.
If the scanning does not stop, press
to stop
scanning, then perform manual tuning (below).
To change the play mode
When you tune in a station that provides RDS
Press PLAY MODE
repeatedly while the player is
services, information such as the service name or
stopped. You can select Normal Play mode ("FLDR"
station name is provided by broadcasts.
for all MP3 files in the folder on the disc), Shuffle Play
mode ("SHUF" or "FLDR SHUF*" for folder shuffle), or
For manual tuning
Program Play mode ("PGM").
Press TUNING MODE
repeatedly until
* When playing a CD-DA (audio) disc, FLDR or FLDR SHUF Play
"MANUAL" appears, and then press +/
performs the same operation as Normal or SHUF Play.
repeatedly to tune in the desired station.
Notes on Repeat Play
"
" indicates that all tracks or files will be repeated until you stop
Running the DAB Automatic Scan manually
playback.
"
1" indicates that a single track or file will be repeated until you
Before you can tune in DAB/DAB+ stations, you must
stop playback.
perform a DAB Initial Scan.
Notes on Shuffle Play mode
When you have moved to another area, also perform the
When Shuffle Play mode is set to "SHUF, " the system shuffle-plays
DAB Initial Scan manually to update the DAB/DAB+
all tracks or files on the disc. When Shuffle Play mode is set to
service information.
"FLDR SHUF, " the system shuffle-plays all tracks or files in selected
folder.
1
Select the DAB function.
When you turn off the system, the selected Shuffle Play mode
Press DAB FUNCTION on the remote or press
("SHUF" or "FLDR SHUF") is cleared and the play mode returns to
FUNCTION on the unit repeatedly.
Normal or FLDR Play mode.
The function indicator lights in pink.
Notes on playing MP3 discs
Do not save other types of tracks or files, or unnecessary folders on
2
Press TOOL MENU to start the DAB Automatic
a disc that has MP3 files.
Scan.
Folders that have no MP3 files are skipped.
"INITIAL SCAN" appear.
The system can only play MP3 files that have a file extension of
".mp3. "
3
Press
to perform scanning.
Even when file name has the ".mp3" file extension, if the actual
file differs, playing this file may generate a loud noise which could
Scanning begins. The scanning progress is indicated
damage the system may malfunction.
by asterisks (). Depending on the DAB/
The maximum number of:
DAB+ services available in your area, scanning may
999* folders (including the root folder)
take a few minutes.
999 MP3 files
250 MP3 files in a single folder
8 folder levels (in the tree structure of files)
Compatibility with all MP3 encoding/writing software, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
When scanning is complete, a list of available services
is created.
* This include folders that have no MP3 or other files. The number
of folders that the system can recognize may be less than actual
Notes
number of folders, depending on the folder structure.
If your country or region does not support DAB/DAB+ broadcast,
"NO SERV" appears.
This procedure clears all previously stored presets.
Before unplugging the DAB/FM antenna, make sure the system is
turned off to preserve your own DAB/DAB+ settings.
Tuning in a DAB/DAB+ station
When placing or removing the iPod/iPhone/iPad, brace the system
with one hand and take care not to press the controls of the iPod/
Before tuning in DAB/DAB+ stations, make sure that
iPhone/iPad by mistake.
the DAB Initial Scan has been performed.
To change the volume level, use VOLUME +/
. The volume
level does not change if you adjust it on the iPod/iPhone/iPad.
1
Select the DAB function.
To use an iPod/iPhone/iPad, refer to the user's guide of your
Press DAB FUNCTION
on the remote or press
iPod/iPhone/iPad.
Sony cannot accept responsibility in the event that data recorded to
FUNCTION
on the unit repeatedly.
iPod/iPhone/iPad is lost or damaged when using an iPod/iPhone/
The function indicator lights in pink.
iPad with this system.
2
Perform tuning.
Press TUNING MODE
repeatedly until "AUTO"
Using the Bluetooth function
appears, and then press +/
to select a station.
When you tune in a station that provides RDS
You can listen to music from your Bluetooth mobile
services, information such as the service name or
phone or Bluetooth device over a wireless connection.
station name is provided by broadcasts.
The system
Notes on DAB/DAB+ stations
When tuning in a DAB/DAB+ station, it may take a few seconds
before you hear any sound.
Primary service is automatically received when secondary service
ends.
This tuner does not support data services.
Tip
To reduce static noise on a weak FM stereo station, press FM MODE
repeatedly until "MONO" appears to turn off stereo reception.
Presetting radio stations
1
Tune in the desired station.
Bluetooth device such as
2
Press TUNER MEMORY
to select the tuner
a Bluetooth "Walkman"
memory mode.
This system supports the Bluetooth A2DP and AVRCP
Preset number
profiles. For details on Bluetooth wireless technology,
see "Bluetooth wireless technology. "
Check the website below for the latest information about
compatible devices.
http://support.sony-europe.com/
3
Press +/
repeatedly to select the desired
About the indicator for Bluetooth
preset number.
The function indicator lights or flashes in blue to allow
If another station is already assigned to the selected
checking the Bluetooth status.
preset number, the station is replaced by the new
System status
Indication status
station.
The system is in Bluetooth
Flashes slowly in blue.
4
Press
to register the station.
Standby (when the system
5
Repeat steps 1 through 4 to register other stations.
is on)
You can preset up to 20 DAB/DAB+ and 20 FM
During Bluetooth pairing
Flashes quickly in blue.
stations.
The system is attempting to
Flashes in blue.
connect with a Bluetooth
Notes on presetting DAB/DAB+ stations
device
You can preset a DAB/DAB+ service only when it can be received.
If you select an unregistered preset number, "NO PRESET" appears
The system has established
Lit in blue.
in the display.
in connection with a
Bluetooth device
To tune in to a preset radio station
If you registered a radio station to a preset number 1
Pairing this system with a Bluetooth
to 6, the radio station will be tuned in by just pressing
device
the TUNER MEMORY NUMBER (1 to 6) when the
system function is set to FM or DAB.
Pairing is an operation where Bluetooth devices register
with each other beforehand. Use the procedure below
If you registered a radio station to a preset number 7
to pair the system with your Bluetooth device. Once
or higher, press TUNING MODE repeatedly until
a pairing operation is performed, it does not need to
"PRESET" appears then press +/- repeatedly to select
be performed again. If pairing is already completed,
the desired preset number.
proceed to "Playing music from a Bluetooth device. "
1
Place the Bluetooth device to be connected to this
system within 1 meter of the system.
Playing the iPod/iPhone/iPad
2
Select the BLUETOOTH function.
1
Select the iPod function.
Press BLUETOOTH FUNCTION on the remote
or press FUNCTION on the unit repeatedly.
Press iPod FUNCTION
on the remote or press
The function indicator flashes slowly in blue and "BT
FUNCTION
on the unit repeatedly.
AUDIO" appears in the display.
The function indicator lights in white.
2
If already connected with a Bluetooth device that
Place the iPod/iPhone/iPad.
has been connected with this system in the past by
3
Start playback.
automatic connection, press
(Bluetooth) on the
Press
on the remote or press
on the
unit to cancel the connected Bluetooth device. "BT
unit.
AUDIO" appears.
3
Press and hold
(Bluetooth) on the unit for 2
To control the iPod/iPhone/iPad
seconds or longer.
To
Press
The function indicator lights quickly in blue and
Pause playback
/
.
"PAIRING" flashes. The system is in Pairing mode.
Select a track
/
. To fast-forward or
4
Operate the Bluetooth device and perform the
or chapter of
fast-rewind, hold down the button.
pairing operation.
audiobook/
For details on operations of the Bluetooth device,
podcast
refer to the operation manual supplied with your
Find a point in a
Hold down /
during
Bluetooth device.
track or chapter
playback, and release the button at
of audiobook/
the desired point.
When searching for this system with the Bluetooth
podcast
device, a list of the devices found may appear on the
Bluetooth device display, depending on the type of
Choose the
.
Bluetooth device.
selected item
This system appears as "CMT-V75BTiP (S). "
Scroll up/down
/
.
When establishing a connection with this system,
the iPod menus
select the audio profile (A2DP, AVRCP) at the
Return to the
TOOL MENU /RETURN
.
Bluetooth device. If the Bluetooth device does not
previous menu or
support the AVRCP profile, you cannot perform
select a menu
playback or other operations with the system.
5
To use the system as a battery charger
Select "CMT-V75BTiP(S)" on the display of the
Bluetooth device.
You can use the system as a battery charger for an iPod/
iPhone/iPad whether the system is on or off.
If prompted to enter a passkey on the Bluetooth
To see whether charging is operating or not, check the
device, enter "0000. "
battery icon of the iPod/iPhone/iPad display. Check the
6
Operate the Bluetooth device and perform the
"iPod/iPhone/iPad section" of the "Specifications" for
Bluetooth connection.
a list of iPod/iPhone/iPad models compatible with this
When pairing is completed and connection with
system.
the Bluetooth device is established correctly, "BT
To stop charging an iPod/iPhone/iPad
AUDIO" appears and the function indicator flashes
slowly in blue.
Remove the iPod/iPhone/iPad.
Depending on the type of Bluetooth device,
Note on charging an iPod/iPhone/iPad
If you press DISPLAY
while charging when the system is off, the
connection may start automatically after paring is
system stops charging an iPod/iPhone/iPad. To restart charging of an
completed.
iPod/iPhone/iPad, reconnect the iPod/iPhone/iPad when the display
mode is Power Saving mode.
Notes
"Passkey" may be called "Passcode, " "PIN code, " "PIN number" or
Notes
"Password, " etc., depending on the device.
The performance of the system may be vary, depending on the
The pairing standby status of the system is cancelled after about 5
specifications of your iPod/iPhone/iPad.
minutes. If pairing is not successful, redo the procedure from step 1.
When placing or removing the iPod/iPhone/iPad, handle the
While connected to a Bluetooth device, this system cannot be
iPod/iPhone/iPad in the same angle as that of the iPod/iPhone/iPad
detected and connection cannot be established from another
connector on the unit and do not twist or sway the iPod/iPhone/
Bluetooth device.
iPad to prevent connector damage.
If you want to pair with several Bluetooth devices, perform the
Do not carry the system with an iPod/iPhone/iPad set on the
procedure from step1 to 6 individually for each Bluetooth device.
connector. Doing so may cause a malfunction.
Advertisement
