Know Your Miter Saw - Wen 70712 Instruction Manual

M
L
K
J
I
A
B
C
D
E
F
G
UNPACKING
If you find any pieces that are missing or wrong, do not operate the tool until the parts have been replaced. Failure
to do so could result in serious personal injury.
1. Remove all loose parts from the carton.
2. Remove the packing materials from around the saw.
3. Using the carrying handle carefully lift the saw from the carton and place it on a level work surface.
4. The saw has been shipped with the saw arm locked in the down position. To release the saw arm, push down
on the top of the saw arm, pull on the release knob (FIGURE 2), rotate it 45° and let go, slowly raise the saw arm.
5. Loose the slide lock knob (FIGURE 3).
WARNING - Do not lift the saw while holding on to the guards. Use the carrying handle.

KNOW YOUR MITER SAW

Operating Handle
ON/OFF Switch
Lower Blade Guard
Fence
Miter Table
Table Insert
Miter Table Lock
H
H Miter Scale
I Bevel Lock Knob
J Slide Bar
K Slide Lock Knob
L Dust Extraction Port
M Guard Retraction Arm
A
B
C
D
E
F
G
7