The working distance depends on the existence of
obstacles (a person, metal, walls, etc.) between the
glasses and the TV and the strength the Bluetooth
Turn off the 3D glasses while they are not in use. If
you leave the 3D glasses on, the battery lifespan
1. Turn on the TV, and then move the glasses within
19.5 inches of the TV.
2. Press the power button on the 3D glasses briefly. The
3D glasses will power on and pairing will start.
3. The message "3D glasses are connected to TV." will
be displayed on the TV screen when the pairing is
If pairing fails, the 3D glasses will power off.
If the first attempt to pair fails, power the TV off
and on again and perform step 2.
How to pair again: Press the power button on the
3D glasses for more than 1 second.
If you encounter...
My 3D glasses do not work.
The LED keeps blinking
Specifications (Model Number: SSG-5100GB )
Product specifications may be changed without notice in order to enhance product performance.
The continuous operating time may differ depending on the wireless communication environment and
Replace the battery.
The 3D glasses should be close to the TV. Make sure that the distance between
the TV and your 3D glasses is less than 19.5 feet (6m) in a straight line.
Check the 3D function settings of your TV.
The battery is dead. Replace the battery.
2 ~ 6 m (6.5 to 19.5 ft)
21.5 g/.76 oz. (including the battery: 24.0±0.5 g/.85.±.018oz. )
One 3 V lithium/manganese dioxide battery 3 V(CR2025)
0.85 mA (Average)
50 °F ~ 104 °F (10°C ~ 40°C)
-4 °F ~ 113 °F (-20°C ~ 45°C)
Pairing is needed again in the following situations:
If the 3D glasses do not function, even when the
power button is pressed, especially with a 3D TV
after a repair.
If you want to play 3D content on another
Samsung 3D TV model that belongs to the D, E,
or F series released in 2011 through 2013. You
must pair the glasses with the other TV.
Watching 3D Video
Some 3D modes may not be available depending on the
format of the image source.
To watch in 3D, you must wear 3D Active Glasses and
turn the glasses on by pressing the power button.
1. Go to the 3D screen. (Picture > 3D)
2. Select the 3D Mode. The 3D Mode screen appears.
3. Set the 3D Mode of the image you want to view.
165mAh, 3.0 V (CR2025)
English - 16