Plasma Panel Replacement Method; Remove The Rear Cover; Remove The Rear Terminal Cover; Remove The P-Board - Panasonic TH-58PE75U Service Manual

6

Plasma panel replacement method

6.1.

Remove the rear cover

1. See Service Hint (Section 5)
6.2. Remove the rear terminal
cover
1. Remove the screws (×8

2. Remove the rear terminal cover.

6.3.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P2, P6, P7, P9, P10, P11, P12,
and P25).
3. Remove the screws (×8
4. Remove the screws (×34
).
) and remove the P-Board unit.
) on the back side.
5. Disconnect the connectors (CN06-CN02, CN08-CN1602
and CN1702-CN1601).
6. Remove the screws (×13
7. Remove the molding props (×4
8. Remove the P(Multi)-Board.
9. Remove the molding props (×7
10. Remove the P(Sus)-Board.
9
TH-58PE75U
).
).
).