Craftsman 320.39592 Operator's Manual page 14

ATTACHING THE
SANDPAPER
(Fig. 6)
WARNING: Always inspect the
sandpaper before attaching. Do
not use if broken, torn or defective.
1. Disconnect the sander from
the power source.
2. Place the random orbit sander
upside down on a flat surface.
3. Remove any dust or debris
from the sanding pad.
4. Align the holes of the
sandpaper with the holes in
the sanding pad and firmly
press the sandpaper against
the sanding pad to ensure a
good attachment.
Fig. 6
Fig. 7
Sandpaper
Sanding pad
DUST BOX (Fig. 7)
,_ WARNING: Do not use the
dust box when sanding metal.
Using the dust box when sanding
metal creates a fire hazard, which
could damage the tool and lead to
serious personal injury.
Your random orbit sander is
supplied with a dust box to help
you keep the working area clean. The dust box is ideal for smaller jobs.
To install:
1. Disconnect the sander from the power source.
2. Align the rib on the dust-exhaust port with the groove on the dust-collecting
box outlet.
3. Slide the dust box onto the port as far as possible (Fig. 7).
NOTICE: From time to time, clean the vacuum adaptor with a dry brush.
To remove:
1. Disconnect the sander from the power source.
2. Grip the dust-collecting box firmly, and pull it out from the tool (Fig. 7).
14