Maintenance - Craftsman 320.39592 Operator's Manual

4. Gently shake or tap the dust box and the cover to empty.
5. Use a soft brush to clean the filter.
NOTICE: The filter cannot be rinsed with water.
6. Reattach the upper cover to the box, and firmly reinstall the box on the sander.
WARNING: Collected sanding dust from sanding surface coatings such as
polyurethanes, linseed oil, etc. can self-ignite in the sander dust box or elsewhere
and cause fire. To reduce the risk of fire, always empty the dust box frequently
while sanding and never store or leave a sander without totally emptying its dust
box. Also follow the recommendations of the coating manufacturers.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged
by their use. Use clean clothes to remove dirt, dust, oil, grease, etc. Keep all
ventilation openings clean.
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
PROBLEM
The sander does not
work
Unsatisfactory
sanding result
CAUSE
Not connected to power
source
Sandpaper is worn
Sandpaper is not suitable
for the workpiece
SOLUTION
Plug the sander into a
power source
Install new sandpaper
Use correct sandpaper
17