Sony KV-27FS13 Service Manual page 155

MTS
Multi-Channel
sound


If your TV is set to Auto-SAP, some programs may be muted or distorted. If
your TV does not output sound, change your Audio settings to Stereo or
Mono.


Press for direct MTS settings (Stereo, Mono, Auto-SAP).
Speaker
Custom selection
of audio output
source
Audio Out
Use to control the
TV's volume
through a stereo


Audio Out can only be set when Speaker is set to OFF.
Stereo: Select when viewing a broadcast in stereo.
Mono: Select to reduce noise in areas of poor reception.
Auto-SAP: Select to have the TV automatically switch to a
Second Audio Program (SAP) when a signal is received.
ON: Select to listen to the sound from the TV speakers with
or without a separate stereo system.
OFF: Select to turn off the TV speakers and listen to the
TV's sound only through external audio system speakers.
Use Audio Out only when you have an external audio
system connected to your TV.
Variable: Adjust the volume through your TV.
Fixed: Adjust the TV volume through a connected stereo.
Using the Menus
25