LG WD-14120(5)RD Service Manual page 37

PUMP
Screw
Cap
(Remaining Hose)
HEATER
Washing
Heater
Ring Terminal
Nut
THERMISTOR
Thermistor
Bracket
Thermistor bulb
Pump Outlet Hose
Tub Pump Bellows
① Remove pump outlet hose.
② Remove tub pump bellows.
③ Remove cap(Remaining Hose).
④ Disconnect the wiring.
⑤ Three screws are unscrewed from the cabinet.
⑥ Remove the pump to arrow direction.
① Loosen the nut.
② Remove washing heater by pulling out.
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
① Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
36