S P I N T R O U B L E
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the Wash and Rinse buttons at
the same time on the program.
When pressing Rinse, Spin and POWER buttons at
the same time after power off, press the Start/Pause
button 1 times, is the drum low speed spin?
Is it disconnected, or disassembled?
Check the motor connector, is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
① ① ② ② ③ ③
Resistance of terminal:
① ① ~ ~ ② ② / ② ② ~ ~ ③ ③ / ③ ③ ~ ~ ① ① : About 5Ω Ω ~15Ω Ω
Replace the MAIN PWB ASSEMBLY
D O O R D O E S N O T O P E N
^ ^ Door lock_ _ Display lamp on?
Is ^ ^
_ _ Displayed?
Check the S.PRESSURE SWITCH
ASSEMBLY or HOSE (Pressure).
If the problem is on the
ASSEMBLY or the HOSE,
replace the S.PRESSURE
SWITCH ASSEMBLY or the
Correct the connector.
Replace the STATOR
After draining and
^Door lock_ lamp off,
open the door.
Check switch Assembly,
Door lock connector and