Sony SRX-R320 Operating Instructions Manual page 19

Message number Error message
ALERT_11 BOARD ERROR
ALERT_12 BOARD DETACHED
ALERT_13 BOARD DETACHED
ALERT_14 BOARD DETACHED
ALERT_15 BOARD DETACHED
ALERT_16 BOARD DETACHED
ALERT_17 BOARD DETACHED
ALERT_18 BOARD DETACHED
ALERT_19 TEMPERATURE ERROR
ALERT_20 TEMPERATURE ERROR
ALERT_21 TEMPERATURE ERROR
ALERT_22 COVER DETACHED
ALERT_27 FAN ERROR
ALERT_28 FAN ERROR
ALERT_29 FAN ERROR
ALERT_30 FAN ERROR
ALERT_32 BALLAST ERROR
ALERT_33 BALLAST ERROR
ALERT_34 BALLAST ERROR
ALERT_35 LAMP ERROR
ALERT_36 BALLAST ERROR
ALERT_37 COVER DETACHED
ALERT_38 BOARD ERROR
ALERT_39 TEMPERATURE ERROR
ALERT_41 COVER DETACHED
WARNING: Danger level – Middle
Message number Error message
WARN_01 FAN ERROR
WARN_02 FAN ERROR
WARN_05 FAN ERROR
WARN_06 FAN ERROR
WARN_12 FAN ERROR
WARN_13 FAN ERROR
WARN_14 FAN ERROR
WARN_20 DEVICE ERROR
WARN_21 DEVICE ERROR
WARN_22 DEVICE ERROR
WARN_23 CONNECTOR DETACHED
WARN_24 CONNECTOR DETACHED
WARN_25 CONNECTOR DETACHED
WARN_26 DOUSER ERROR
WARN_27 BALLAST ERROR
WARN_28 BALLAST ERROR
Meaning
Trouble with power of SY board
CN board disconnected
MX board disconnected
LPD board disconnected
CT board disconnected
DST board disconnected
PR1 board disconnected
PR2 board disconnected
Temperature of R panel is too high, and the unit stops operation.
Temperature of G panel is too high, and the unit stops operation.
Temperature of B panel is too high, and the unit stops operation.
Rear cover detached and/or internal mirror position changed
Abnormal in fan A for lamp
Abnormal in fan B for lamp
Abnormal in fan C for lamp
Abnormal in fan D for lamp
Temperature of lamp power is too high, and the unit stops operation.
Abnormal in the fans for lamp power
Abnormal in the lamp power
The lamp does not light, or goes out.
Abnormal in the lamp power
Abnormal position of the lamp house cover
Trouble with power of CN board
Temperature of 8-inch duct attachment part is too high, and the unit stops
operation.
Filter duct is detached, and the unit stops operation.
Meaning
Abnormal in fan 1 for the main power
Abnormal in fan 2 for the main power
Abnormal in fan 1 for board
Abnormal in fan 2 for board
Abnormal in fan for peltier R
Abnormal in fan for peltier G
Abnormal in fan for peltier B
Failure of the peltier R control
Failure of the peltier G control
Failure of the peltier B control
The peltier R connector disconnected
The peltier G connector disconnected
The peltier B connector disconnected
Trouble with the douser operation
Failure of the ballast communication for the lamp power
Incorrect settings of the lamp S/N
19
Messages