Display Setting; Audio Setting - Toshiba SDV398KC Owner's Manual

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 27.
4
Select the desired item.
DISPLAY menu
ENTER
Note:
PROGRESSIVE:
• You can set "PROGRESSIVE" to
"OFF" in "DISPLAY" menu or press
and hold [ B (PLAY)] on this unit
on the DVD side for more than
5 seconds during playback until
"P. SCAN" disappears on the DVD
player's display.
• When "PROGRESSIVE" is "ON",
"P. SCAN" appears on the DVD
player's display after you exit the
setup screen.
Note:
• In "QUICK" menu, "PLAYER
MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. "QUICK"
menu consists of the setting
menu frequently used, and they
are accompanied with
You can make all settings in
"CUSTOM" menu.
C

AUDIO Setting

Choose the appropriate audio setting for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the
"CUSTOM Menu" section on page 27.
4
Select the desired item.
AUDIO menu
ENTER
Note:
• In "QUICK" menu, "PLAYER
MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. "QUICK"
menu consists of the setting
menu frequently used, and they
are accompanied with
You can make all settings in
"CUSTOM" menu.
EN
Downloaded From Disc-Player.com Toshiba Manuals
E8EB6CD_SD-V398KC_EN_v1.indd 28 E8EB6CD_SD-V398KC_EN_v1.indd 28
5
TV ASPECT:
(Default: 4:3 LETTER BOX)
See note on the right.
or
TV ASPECT
STILL MODE
PROGRESSIVE
STILL MODE:
(Default: AUTO)
DISPLAY
See note on the right.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
TV ASPECT
STILL MODE
PROGRESSIVE OFF
PROGRESSIVE:
(Default: OFF)
See note on the left.
TV ASPECT
STILL MODE
PROGRESSIVE
If there is no picture
or you do not press
any buttons for 15
seconds, "PROGRES-
SIVE" will switch to
"OFF" and it will exit
"SETUP" menu.
.
QUICK
5
DRC (Dynamic Range Control): (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
DRC
or DOWN SAMPLING ON
DOLBY DIGITAL
DTS
DOWN SAMPLING: (Default: ON)
Set to "ON" when outputting in 48kHz.
Set to "OFF" when outputting the original sound.
AUDIO
DRC
DRC ON
DOWN SAMPLING ON
DOWN SAMPLING ON
DOLBY DIGITAL
DOLBY DIGITAL BITSTREAM
DTS OFF
DTS
DOLBY DIGITAL:
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING ON
DOLBY DIGITAL
DTS
DTS:
QUICK
Set to "BITSTREAM" when the unit is connected to a DTS decoder.
.
QUICK
DRC
DOWN SAMPLING ON
DOLBY DIGITAL
DTS
QUICK
Select the
desired
setting.
TV ASPECT
4:3 LETTER BOX
4:3 LETTER BOX
AUTO
4:3 PAN & SCAN
OFF
16:9 WIDE or
ENTER
Select the
desired
setting.
STILL MODE
4:3 LETTER BOX
AUTO
AUTO
FIELD
FRAME
or
ENTER
QUICK
4:3 LETTER BOX 4:3 LETTER BOX
AUTO AUTO
OFF ON
ENTER
Select "YES".
Before proceeding...
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting 'YES',
wait about 15 seconds for auto recovery.
A cti vate P ro gressi ve ? NO
YES
SELECT: K / L SET: ENTER
ENTER
Select "YES".
Confirm again to use progressive scan.
If Picture is good, select 'YES'.
NO NO
YES YES
SELECT: K / L SET: ENTER
ON OFF
ON
BITSTREAM BITSTREAM
ENTER
OFF OFF
ON ON
OFF
BITSTREAM BITSTREAM
ENTER
OFF OFF
(Default: BITSTREAM)
QUICK
ON ON
ON
BITSTREAM PCM
OFF OFF
ENTER
(Default: OFF)
ENTER
ON ON
ON
BITSTREAM PCM
OFF BITSTREAM
– 28 –
6
To exit "TV ASPECT" or "STILL
MODE" menu
ENTER
To complete
"PROGRESSIVE" setting
ENTER
Note:
ENTER
TV ASPECT:
• Select "4:3 LETTER BOX", so
that black bars may appear
on the top and bottom of the
TV screen.
• Select "4:3 PAN & SCAN" for a
full height picture with both
sides adjusted.
• Select "16:9 WIDE" if a wide-
screen TV is connected to
this unit.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", it
automatically selects the
best resolution setting
("FRAME" or "FIELD") based
on the data characteristics of
the pictures. (default)
• If you select "FIELD", the
picture in the still mode will
or
be stabilized.
• If you select "FRAME", the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
"frame", which consists of
two separate images called
as "field".
• Some pictures may be
or
blurred if you select "AUTO"
in the still mode due to their
data characteristics.
6
To exit the menu
Note:
DRC:
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled
at 48kHz, even if you set to
"OFF".
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
2009/01/29 17:05:55 2009/01/29 17:05:55