Table of Contents
Advertisement
Available languages
Available languages
5)
The Adjustable Comb Attachments(6mm) is to be used with Precision Trimmer,while the
Adjustable Comb Attachments (12mm,20mm)are to be used with Full Size Trimmer Heads.
To add, align the Comb side rails with slots of trimmer head. Secure Comb by sliding down-
ward, away from blade head.
(NOTE: a clicking sound means Comb attachment is secure and ready for use).
hAIR CLIPPING
•
Before you start clipping, make sure that the head of the person whose hair you are cutting is
at the same level as your chest so that all parts of his/ her head are clearly visible and within
easy reach.
•
Only use the clipper on dry hair.
•
Do not use on freshly washed hair.
•
Before you begin, comb the hair in the direction of growth.
•
To achieve optimal clipping results, always move the clipper slowly through the hair against
the direction of hair growth.
Clipping with hair comb attachment
1)
Put the hair clipper comb on the full width trimmer attachment and push until you hearit
‚click' into place.
2)
Press the Hair Length Selector and slide it to the desired setting.
3)
The setting selected will appear in the window.
When you are clipping for the first time start at the maximum clipping length setting to fami-
liarize yourself with the clipper and prevent accidentally trimming hairs too short. As you
become familiar with the settings, adjust the Hair Length Selector to desired trimming length.
Selector will ‚click' into position at each setting.
4)
Make sure that the flat part of the comb is always in full contact with the scalp to obtain an
even result.
5)
Move the clipper slowly over the crown from different directions to achieve an even result.
6)
Always move the clipper against the direction of hair growth.
7)
Make overlapping passes over the head to ensure that all hair that should be cut has been
cut.
8)
Turn the Clipper off and remove the hair comb often to blow and/or shake out hair that has
accumulated.
Contouring without the hair clipping comb attachment
1)
Remove the hair comb by pressing and sliding the comb attachment upwards.
Be careful when you are clipping without comb attachment as when the clipper is turned on
it will trim every hair it touches.
2)
Tilt the clipper in such a way that only one edge of the trimming attachment touches the hair
ends when you shape the contours around the ears.
3)
To contour the nape of the neck or hairline, turn the clipper and hold it with the trimming
attachment pointing downwards.
4)
To contour the sideburns, turn the clipper and hold it with the trimming attachment pointing
downwards.
TRIMMING
•
Make sure hair is clean and dry.
•
Always comb the hair with the styling comb in the direction of growth before you start
trimming.
•
Do not move the Clipper too fast. Make smooth and gentle movements.
ENG - 27
ENG
Advertisement
Table of Contents
