Description Of The Controls; Instructions For Use - Hyundai HC 810S Instruction Manual

DESCRIPTION Of THE CONTROLS

P1 Handle
P2 Release button
P3 On/Off Switch
P4 Switch 115 V / 230 V
P5 Air intake grill
P6 Rotary brush

INSTRUCTIONS fOR USE

Switch
0 = 0ff
1 = Gentle warm air flow for easy styling
2 = Stronger and warmer air flow for fast styling and drying
OPERATING
Warning: The attachement will inevitably become hot during use. Make sure to let it cool
down before handling.
Use only on dry or nearly dry hair and ensure hair is fully detangled before starting to style.
Attach the required attachment then plug the styler in. Select the desired heat setting to begin
styling.
The small round brush is suitable for styling fine and/or relatively short hair, or for simply
brushing through. The heat spreads evenly through the hair section, making it easy to style.
Separate your hair into sections. Starting at the front, place the brush at the roots and slowly
let the brush glide down the hair section to smooth the cuticle. Continue around the nape, and
up to the top of the head. Style the bottom sections by curling hair around the brush.
Press the brush rotated button and hold it down to rotate the brush. Contrarily ,the brush is fixed
Dual Voltage Selected function
This Airstryler is equipped with a dual voltage switch to change between 115 V and 230 V. The
switch is located on the front of the handle.Before using the airstryler,cheek that it is set to the
correct voltage.You can switch between 115 V and 230 V by turning the switch using a key at-
tached or ordinary screwdriver.
Important:
If you plug the appliance to 230 V (standard in the Europe) and the switch on the handle will be
in position 115 V, the appliance will be damaged beyon repair.
ENG - 1
ENG