Product Setup - D-Link DIR-818LW Quick Installation Manual

PRODUCT SETUP

WEB-BASED SETUP
In order to use all of the functions of this router, you must register it with mydlink. Simply
follow the steps at the end of the Setup Wizard during installation to register your product with your
mydlink account.
NOTE: After mydlink registration is completed, your router's default PPPoE, L2TP, PPTP connection
will be set to Always on. If your ISP charges for usage, you may wish to manually choose On
demand as your reconnect setting.
PC
Router
Modem
Modem
Router
PC
Modem
Router
WELCOME TO THE D-LINK SETUP WIZARD
DIR-818LW
Step 1
Position your DIR-818LW near your Internet-connected modem and
computer. Keep the router in an open area for better wireless
coverage.
Step 2
Unplug the modem Ethernet cable connected to your computer and
plug it into the port labeled 'INTERNET' on the router.
Connect the supplied power adapter to the router and a power outlet,
then verify that the power LED is on.
Step 3
Plug one end of the supplied Ethernet cable into the port labeled '1'
on the back of the router, and the other end into the Ethernet port on
your computer.
To set up the DIR-818LW through Wi-Fi, go to your computer or
mobile device's Wi-Fi settings and select the network name (SSID).
Next, enter the Wi-Fi password (the default network name and
password are found on the included Wi-Fi Configuration Note).
Step 4
Open a browser on the connected computer. If you are not automatically
directed to the D-Link Setup Wizard, go to 'http://dlinkrouter.local./'
and follow the onscreen instructions to configure your DIR-818LW.
Use 'Admin' as your username and leave the password blank to
configure manually.
3