Product Setup - D-Link DIR-300 Quick Installation Manual

PRODUCT
SET-UP
CD SET-UP WIZARD
ADVANCED SET-UP (ACCESS VIA IP ADDRESS)
To configure DIR-300 manually (without the set-up CD) connect your computer to the DIR-300
using the ethernet cable provided. Then connect the power cable on the DIR-300. The power
light will display as solid blue.
Then simply open a browser window and enter the IP address in the browser address field:
DIR-300
SET-UP WIZARD CD
The CD contains all of the instructions required to set-up DIR-300
INSERT CD
Insert the CD into the CD drive of your computer. The set-up
wizard should start automatically. Make sure that your internet
connection is active. (Do not plug in DIR-300 yet)
SET-UP WIZARD
Select your language from the list of options and follow the
steps within the wizard to complete the set-up of DIR-300
IP ADDRESS: http:// dlinkrouter or http://192.168.0.1
USERNAME: admin
PASSWORD:
5