Technical Data; Limited Warranty - Tekmar D 270 Data Brochure

Boiler control
Table of Contents

Advertisement

Technical Data

Boiler Control 270 One Modulating Boiler & DHW
Literature
— D 270, A 270, D 001, D 070.
Control
— Microprocessor PID control; This is not a safety (limit) control.
Packaged weight
— 3.3 lb. (1500 g), Enclosure A, blue modified PVC plastic
Dimensions
— 6-5/8" H x 7-9/16" W x 2-13/16" D (170 x 193 x 72 mm)
Approvals
— CSA C US, meets ICES & FCC regulations for EMI/RFI.
Ambient conditions
— Indoor use only, 32 to 104°F (0 to 40°C), < 90% RH non-condensing.
Power supply
— 115 V (ac) ±10% 50/60 Hz 600 VA
Relay capacity
— 230 V (ac) 5 A 1/3 hp pilot duty 240 VA
Modulation Output
— 0 – 10 V (dc)
Demands
— 20 to 260 V (ac) 2 VA
Sensors included
— NTC thermistor, 10 k @ 77°F (25°C ±0.2°C) ß=3892
Outdoor Sensor 070 and Universal Sensor 082
— Indoor Sensor 076/077
Optional devices
The installer must ensure that this control and its wiring are isolated and/or shielded from strong sources of electromagnetic noise. Conversely, this Class B digital apparatus
complies with Part 15 of the FCC Rules and meets all requirements of the Canadian Interference-Causing Equipment Regulations. However, if this control does cause harmful
interference to radio or television reception, which is determined by turning the control off and on, the user is encouraged to try to correct the interference by re-orientating
or relocating the receiving antenna, relocating the receiver with respect to this control, and/or connecting the control to a different circuit from that to which the receiver is
connected.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Caution The nonmetallic enclosure does not provide grounding between conduit connections. Use grounding type bushings and jumper wires.
Attention Un boîtier nonmétallique n´assure pas la continuité électrique des conduits. Utiliser des manchons ou des fils de accord spécialement conçus pour la mise
á la terre.
Limited Warranty and Product Return Procedure
Limited Warranty The liability of tekmar under this warranty is limited. The
Purchaser, by taking receipt of any tekmar product ("Product"), acknowl-
edges the terms of the Limited Warranty in effect at the time of such Product
sale and acknowledges that it has read and understands same.
The tekmar Limited Warranty to the Purchaser on the Products sold hereunder
is a manufacturer's pass-through warranty which the Purchaser is authorized
to pass through to its customers. Under the Limited Warranty, each tekmar
Product is warranted against defects in workmanship and materials if the Prod-
uct is installed and used in compliance with tekmar's instructions, ordinary
wear and tear excepted. The pass-through warranty period is for a period of
twenty-four (24) months from the production date if the Product is not installed
during that period, or twelve (12) months from the documented date of installa-
tion if installed within twenty-four (24) months from the production date.
The liability of tekmar under the Limited Warranty shall be limited to, at tekmar's
sole discretion: the cost of parts and labor provided by tekmar to repair defects in
materials and/or workmanship of the defective product; or to the exchange of the
defective product for a warranty replacement product; or to the granting of credit
limited to the original cost of the defective product, and such repair, exchange or
credit shall be the sole remedy available from tekmar, and, without limiting the
foregoing in any way, tekmar is not responsible, in contract, tort or strict prod-
uct liability, for any other losses, costs, expenses, inconveniences, or damages,
whether direct, indirect, special, secondary, incidental or consequential, arising
from ownership or use of the product, or from defects in workmanship or materials,
including any liability for fundamental breach of contract.
The pass-through Limited Warranty applies only to those defective Products
returned to tekmar during the warranty period. This Limited Warranty does not
cover the cost of the parts or labor to remove or transport the defective Product, or
to reinstall the repaired or replacement Product, all such costs and expenses being
subject to Purchaser's agreement and warranty with its customers.
Any representations or warranties about the Products made by Purchaser to its
customers which are different from or in excess of the tekmar Limited Warranty are
tekmar Control Systems Ltd., Canada
tekmar Control Systems, Inc., U.S.A.
Control Systems
Head Office: 5100 Silver Star Road
Vernon, B.C. Canada V1B 3K4
(250) 545-7749 Fax. (250) 545-0650
Web Site: www.tekmarcontrols.com
Product design, software and literature are Copyright © 2010 by:
tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
Menu
Item
Boiler Control 270
One Modulating Boiler & DHW
1
2
3
4 5
Boil
Com
DHW
Prim
Dem
Dem
Dem
P1
the Purchaser's sole responsibility and obligation. Purchaser shall indemnify and
hold tekmar harmless from and against any and all claims, liabilities and damages
of any kind or nature which arise out of or are related to any such representations
or warranties by Purchaser to its customers.
The pass-through Limited Warranty does not apply if the returned Product has
been damaged by negligence by persons other than tekmar, accident, fire, Act
of God, abuse or misuse; or has been damaged by modifications, alterations or
attachments made subsequent to purchase which have not been authorized by
tekmar; or if the Product was not installed in compliance with tekmar's instructions
and/or the local codes and ordinances; or if due to defective installation of the
Product; or if the Product was not used in compliance with tekmar's instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO CONTRACTU-
ALLY EXCLUDE, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, DURA-
BILITY OR DESCRIPTION OF THE PRODUCT, ITS NON-INFRINGEMENT OF
ANY RELEVANT PATENTS OR TRADEMARKS, AND ITS COMPLIANCE WITH
OR NON-VIOLATION OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR
SAFETY LEGISLATION; THE TERM OF ANY OTHER WARRANTY NOT HEREBY
CONTRACTUALLY EXCLUDED IS LIMITED SUCH THAT IT SHALL NOT EXTEND
BEYOND TWENTY-FOUR (24) MONTHS FROM THE PRODUCTION DATE, TO
THE EXTENT THAT SUCH LIMITATION IS ALLOWED BY THE GOVERNING
LAW.
Product Warranty Return Procedure All Products that are believed to have
defects in workmanship or materials must be returned, together with a written
description of the defect, to the tekmar Representative assigned to the territory in
which such Product is located. If tekmar receives an inquiry from someone other
than a tekmar Representative, including an inquiry from Purchaser (if not a tekmar
Representative) or Purchaser's customers, regarding a potential warranty claim,
tekmar's sole obligation shall be to provide the address and other contact informa-
tion regarding the appropriate Representative.
All specifications are subject to change without notice.
24 of 24
Advanced
Boiler Demand
DHW Demand
Installer
Modulation
DHW Priority Override
Made in Canada by
tekmar Control Systems Ltd.
tektra 969-03
Power
115 V ±10% 50/60 Hz 600 VA
Relays
230 V (ac) 5 A 1/3 hp, pilot duty 240 VA
Demands
20 to 260 V (ac) 2 VA
Signal wiring must be rated at least 300 V.
Do not apply power
6
7 8
9 10
11
12 13 14 15 16 17 18
Power
DHW
Boiler
Mod V(dc)
Com
UnO Boil
L
N
Pmp/Vlv
Pmp P2
+
--
Sw
Printed in Canada. D 270 - 08/10.
Off
Exercise
Test
Out Com Indr

Advertisement

Table of Contents
loading

Table of Contents