Table of Contents
Advertisement
Quick Links
NOTICE
It is the Purchaser's/Owner's obligation:
1. To disclose and post all Rules & Regulations, Danger, Warning and Caution
labels affixed on the machine to their customers/users.
2. Equipment to be installed by TFI Authorized Dealer or a service
company approved by TFI.
3. Provide trained personnel, supervision and correct usage of the equipment.
4. Provide scheduled inspection, maintenance & repairs and must be performed
by TFI Authorized Dealer or a service company approved by TFI.
5. Must use only genuine TFI replacement parts.
6.
Machine must be anchored to a solid and level surface.
TUFFSTUFF FITNESS INTERNATIONAL
OWNER'S MANUAL
Maintenance & Assembly Instructions
IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE
CG-9504
Lat/Mid Row
CG-9504 Rev0
Revision Date 10-27-2015
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TuffStuff CG-9504
Summary of Contents for TuffStuff CG-9504
- Page 1 TUFFSTUFF FITNESS INTERNATIONAL OWNER’S MANUAL Maintenance & Assembly Instructions IMPORTANT: KEEP THIS MANUAL FOR FUTURE REFERENCE NOTICE CG-9504 It is the Purchaser’s/Owner’s obligation: 1. To disclose and post all Rules & Regulations, Danger, Warning and Caution Lat/Mid Row labels affixed on the machine to their customers/users.
-
Page 2: Table Of Contents
Should additional information be required, or should situations arise that are not covered by this owner’s manual, the matter should be directed to Customer Service at TuffStuff Fitness International Inc. in Chino, California. -
Page 3: Overhead Specifications
Overhead Specifications L 75” X W 48” X H 88” MAX-LOAD WEIGHT LIMIT -200 lbs CG-9504 Lat/Mid Row www.tuffstuffitness.com... - Page 4 Carefully read ALL Danger, Warning & Caution labels posted on the machine WARNING Keep body, hands and fingers clear of all moving parts. BNH2926 2-5/8 x 1 inches PMS 152 www.tuffstuffitness.com CG-9504 Lat/Mid Row...
- Page 5 Carefully read ALL Danger, Warning & Caution labels posted on the machine CG-9504 Lat/Mid Row www.tuffstuffitness.com...
- Page 6 Carefully read ALL Danger, Warning & Caution labels posted on the machine www.tuffstuffitness.com CG-9504 Lat/Mid Row...
- Page 7 You should have received it along with this Owner’s Manual� If you did not receive this Facility Sign with your order, you can obtain one at no cost to you from TuffStuff Fitness by contacting our service department at: 1 (888) 884-8275 service@tuffstuff�net...
-
Page 8: Anchoring Unit
Anchoring Unit Holes on frame are provided for anchoring the unit to the floor� See anchoring hole location below� www.tuffstuffitness.com CG-9504 Lat/Mid Row... -
Page 9: Important Safety Instructions
Always warm-up before and cool-down after weight training. 11. Use only genuine TuffStuff replacement parts. Failure to do so will Warm-up for 10-15 minutes with stretching and cardiovascular void warranty and could result in serious injury or death to the users. -
Page 10: Registration, Service & Assembly
Thank you for purchasing the CG-9504 Lat/Mid Row. This machine is part of the TuffStuff line of quality strength training equipment. To maximize your use of the equipment, please study the Owner’s Manual thoroughly. Allow ample space around the machine for safe unrestricted use and Registration easier access. -
Page 11: Inspection/Maintenance
Professional Service Company approved by TFI. Keep a service log of all maintenance and repair activities. Extra copies can be downloaded from our website www.tuffstuffitness.com INSPECTION / MAINTENANCE RECORDS DATE REPLACEMENT REPAIRS INSPECTED BY WARRANTY REPAIRS DATE REPLACEMENT REPAIRS INSPECTED BY CG-9504 Lat/Mid Row www.tuffstuffitness.com... -
Page 12: Cable Inspection
A BREAK ON THE CABLE CABLE END SLIPPING OUT IMPORTANT NOTE: DAMAGED OR WORN CABLE (AS SHOWN ABOVE) MAY DAMAGE THE PULLEY(S)� YOU MUST INSPECT THE PULLEYS AT THIS TIME FOR WEAR AND TEAR� REPLACE IF NEEDED� www.tuffstuffitness.com CG-9504 Lat/Mid Row... -
Page 13: Step
2. Be sure to hold the weight stack frame perpendicular to floor before tightening the screws. Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9504 Lat/Mid Row www.tuffstuffitness.com... -
Page 14: Step
FLAT WASHER SAE Z/P 1/2” HEX HEAD CAP SCREW GR-5 Z/P 1/2-13 X 1 1/4 FLAT WASHER 3/8 ID X 1 1/2 OD X 3/16 THICK Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9504 Lat/Mid Row... -
Page 15: Step
HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 5 NYLON INSERT THIN PATTERN LOCK NUT Z/P 3/8-16 LABEL DANGER DO NOT REMOVE... 7/8 X 1-1/2 *100 FOOT PLATE *100 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9504 Lat/Mid Row www.tuffstuffitness.com... -
Page 16: Step
SPLIT LOCK WASHER Z/P 3/8” 10 LB STEEL WEIGHT PLATE BLACK 4 X 10 10 LB TOP PLATE W/ADJ SLTR BAR 19 BLK WTS ASM Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9504 Lat/Mid Row... - Page 17 8� Open the lube package provided and apply a thin film of lubricant around the first 3 inches of the guide rods above the top plate� 9� After the cables are installed, do a set of reps to spread the lubricant thoroughly� CG-9504 Lat/Mid Row www.tuffstuffitness.com...
-
Page 18: Step 5 Cable Routing
Step 5 Cable Routing Use guide wire to route the cable www.tuffstuffitness.com CG-9504 Lat/Mid Row... - Page 19 SNAP LINK Z/P 8MM X 80MM SPLIT BOLT GR-5 Z/P 1/2-13 X 1 1/4 (RND CUT) SPLIT LOCK WASHER Z/P 1/2” COIL CHAIN Z/P 3/16 X 8 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9504 Lat/Mid Row www.tuffstuffitness.com...
-
Page 20: Step 6 Cable Routing
Step 6 Cable Routing 27 11 www.tuffstuffitness.com CG-9504 Lat/Mid Row... - Page 21 SNAP LINK Z/P 8MM X 80MM SPLIT BOLT GR-8 Z/P 1/2-13 X 3 1/2 (RND CUT) SPLIT LOCK WASHER Z/P 1/2” COIL CHAIN Z/P 3/16 X 8 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9504 Lat/Mid Row www.tuffstuffitness.com...
-
Page 22: Step
Description Qty. WEIGHT SHIELD FRONT 75 3/8” WEIGHT SHIELD REAR 75 3/8” FLAT HEAD SOCKET CAP SCREW Z/P M6-1.0 X 50 PLASTIC SHROUD LID Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. www.tuffstuffitness.com CG-9504 Lat/Mid Row... -
Page 23: Step
ALUMINUM FOOT ROLL CAP 1” ID FLAT HEAD SOCKET CAP SCREW Z/P 3/8-16 X 1 FLAT WASHER SAE Z/P 3/8” HEX HEAD CAP SCREW GR-5 Z/P 3/8-16 X 3 Fully Tighten 100% Fully Tighten Wrench tighten all hardware in this step. CG-9504 Lat/Mid Row www.tuffstuffitness.com... -
Page 24: Parts List
HEX KEY ALLOY 7/32ʺ BNH0575 PRE ASSEMBLED COMPONENTS Item No. Description Rev. Part No. Qty. Item No. Description Rev. Part No. Qty. DOUBLE PULLEY PLATE UP8507X1 STABILIZER UP8505X1 FOOT PLATE WEIGHT SHIELD FRONT 75 3/8ʺ UP8509X1 UP8518X1 FRONT UPRIGHT WEIGHT STACK FRAME UP8510X1 UP8520X1 LAT BAR HOLDER PLASTIC SHROUD LID UP8512X1 BNH3393X1 MAIN FRAME UP8516X1 *100 FOOT PLATE UP8509X2 www.tuffstuffitness.com CG-9504 Lat/Mid Row... -
Page 25: Pre-Assembled Components
Pre-Assembled Components *12 UP8516X1 *8 UP8512X1 *15 UP8505X1 *3 UP8507X1 *49 BNH3393X1 *5 UP8482X1 *100 UP8482X2 CG-9504 Lat/Mid Row www.tuffstuffitness.com... -
Page 26: Pre-Assembled Components
Pre-Assembled Components *6 UP8510X1 *18 UP8520X1 *16 UP8518X1 www.tuffstuffitness.com CG-9504 Lat/Mid Row... -
Page 27: Notes
Notes CG-9504 Lat/Mid Row www.tuffstuffitness.com...
Need help?
Do you have a question about the CG-9504 and is the answer not in the manual?
Questions and answers