Declaration; Declaration Of Conformity - Danfoss Termix VMTD-F-B Installation Manual

Installation Guide

8.0 Declaration

8.1 Declaration of conformity

8.1.1 Category 0 with electrical equipment
EC – Declaration of Conformity
Gemina Termix A/S
Member of the Danfoss Group
Navervej 15-17
DK-7451 Sunds
Declares on our sole responsibility that the below products:
Substations – Category 0 with electrical equipment,
covered by this declaration are in conformity with the following directives, standards and other normative
documents, provided that they are used according to our instructions.
Machinery Directive 2006/42/EC
DS/EN 60204-1/A1:2009. Safety of machinery –
Part 1 – General Requirements.
DS/EN 12100:2011. Safety of machinery – Risk
assessment.
LVD – Low Voltage Directive – 2006/95/EC
DS/EN 60204-1/A1:2009. Safety of machinery –
Part 1 – General Requirements.
Sunds – 2014.01.31
Place and date of issue
Danfoss District Energy
Termix VMTD-F-B
VI.CW.C3.02 / LUK40110
EMC – Directive – 2004/108/EC
DS/EN 61000-6-2/Corr.:2005. Electromagnetic
compatibility – Generic standard: Immunity
industry.
DS/EN 61000-6-3:2007. Electromagnetic
compatibility – Generic standard: Emission for
residential, commercial & light industry.
Claus Gjøderum Mortensen
Quality & Environment Manager
DEN-GT 19