Reinstall Harness - DJG Alpha Omega Instruction Manual

Reinstall Harness

1
2
3
WARNING
!
Failure to place buckle's metal plate
completely through pad and shell can result
in serious injury or death to the child.
48
4358-5843A US All in One.indd 51-52 4358-5843A US All in One.indd 51-52
Fit the buckle strap
down through the slot
in the seat. Make sure
buckle faces out. From
the bottom of seat,
pull buckle's metal clip
completely through pad
and shell.
From the bottom of seat,
pull buckle's metal clip
completely through pad
and shell.
Pull up on buckle to
make sure buckle's
metal plate is completely
through the pad and
shell.
With the sewn end of the
4
harness strap facing the
buckle, thread the harness
down through the slot on
the left side of shell.
Pull harness across the
5
bottom of the seat and up
through the slot on the
right side. Make sure the
harness is not twisted.
Take both ends of the
harness strap and make
them even in length.
NOTE:
harness adjustment strap
is between the harness
strap and shell as shown.
Harness adjustment
strap should not be
twisted.
Thread the harness straps
6
through each buckle
tongue from the bottom
up. Thread the chest clip.
Push harness ends through
slot in headrest. Repeat
for other harness strap.
DO NOT twist the
harness strap.
49
Make sure the
continued on next page.
1/26/12 11:06 AM 1/26/12 11:06 AM