Table of Contents
Advertisement
Control system devices installation
REMOTE THERMOSTAT AND REMOTE CONTROL ( WIRED OR WIRELESS )
They should be located in the main room of the zone they manage
taking into account the following criteria :
-
the place of installation should be chosen so that the sensor can
measure the room temperature as accurately as possible without
being influenced by the direct solar radiation or by other hot or
cold sources (about 1,5 meters above the floor);
-
in the case of wall mounting, enough clearance above the device
must remain, enabling it to be fitted and removed.
The power supply of the remote thermostat and of the remote control is supplied by the mounting base. When the devices are re-
moved from their base, power is cut off and the devices are out of operation. The wireless remote control is powered by three 1,5 V
alkaline batteries type AA (LR06).
Remote thermostat
96
Remote control
82
4,2
56
60
80
CONTROL SYSTEM
42
4,2
2
1
56
60
1
2
3
1
CL+
BSB data
2
CL-
BSB ground
Wired
Wireless
CL+
BSB data
CL-
BSB ground
G+
Power supply
min.
10 cm
29
Advertisement
Table of Contents
