Before First Use; Switching On And Setting The Thermometer; Measuring Body Temperature - Oricom FS300 User Manual

Before first use

2. Before first use
• before first use, insert the batteries supplied (2 x AAA Alkaline batteries).

3. Switching on and setting the thermometer

• Press the Start button
> The device switches on. After two seconds, the display shows that the
device is ready for use.
> The device always starts in body temperature mode.
3-1. Setting the measurement unit
• Press the Mode button
for at least 3 to 4 seconds.
> The device switches to the other measurement unit.
> Possible measurement units : celsius ° c and Fahrenheit ° F
3-2. Setting the measurement sound
• Press the Sound button
> each time the button is pressed, the sound switches on or off.
> if the display shows
> if the display shows
sound.
> This setting is not stored. The next time the device is switched on, the
sound is reset to.

4. Measuring body temperature

• Press the Start button
> The device switches on. After two seconds, the display shows that the
device is ready for use.
> The device always starts in body temperature mode.
10
briefly.
and MeM button
briefly.
after pressing the button, the device emits sound.
after pressing the button, the device will not emit
briefly.
simultaneously
.