Using Your Steam Mop - Shark S3601NZ Owner's Manual

Using Your Steam Mop

IMPORTANT: Make sure you don't
use the mop without attaching a
microfibre cleaning pad and adding
water to the tank first. When you are
using the mop for the first time, it
might take longer than the normal 30
seconds to start steaming.
IMPORTANT: Your Steam Mop needs
water to make steam! Never use your
steam mop without water in the tank.
Sweep or vacuum your floors prior to
cleaning with your Steam Mop.
fig. 6
1
Pull and twist the quick release cord
holder to unwrap the power cord
completely. Plug into a 220-240volt
electrical outlet. (fig. 6)
2 The ON/STANDBY switch will flash
blue. If the light does not turn on,
reference the troubleshooting section
on page 13. (fig. 7)
fig. 7
5